1 INCH CAM BUCKLE TIE DOWNS

• Tie-downs, Cam Buckle Tie-down, J Hook On One End, Snap Hook On Opposite End
• One Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
• Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
• Product Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier
• J Hook Is Sewn On The End Of The Fixed End Strap And The Hook Is Orientated Facing Down Relative To The Buckle Lying Flat
• Snap Hook On The End Of The Adjustable Strap Has A Built In Retainer Clip To Help Prevent The Hook From Unintentionally Disconnecting
• Cam Buckle Is The Utility Style Cam Buckle. This Type Of Cam Buckle Is Intended To Have The Adjustable Strap Loaded During Assembly An Left Inside The Buckle. It Is Not To Be Fed And Removed Repeatedly. The Adjustable Strap Is Loaded Through The Middle Opening On The Bottom Side Of The Buckle And Fed Back Thru The Teeth Of The Cam Buckle
• Cam Buckle Is Made Of Steel And The Frame Has A Zinc-yellow Plated Finish. The Cam Trigger Has A Zinc-silver Plated Finish
• J Hook Is The Double J Hook Configuration, Which Means The Hook Is Formed From One Piece Of Metal Wire, But The Ends Are Brought Together To Form The Tip Of The Hook
• J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish
• Snap Hook Is The Flat Configuration Which Means That The Hook Lays Flat In The Same Orientation As The Webbing
• Flat Snap Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish
• Strap Is Made With 3000 Lb Polyster Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
• Sewn In The Standard Method To Meet Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Adjustable Strap