1 INCH CAM BUCKLE TIE DOWNS

• Tie-downs, Cam Buckle Tie-down, No End Fitting On Each End, Flat Hook Quick Disconnect In Middle
• Two Part Cam Buckle With Quick Disconnect Configuration Has A Fixed End Strap Seperate From The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
• Cam Buckle Tie-down Are Quick And Easy To Use, Tension Is Created By Pulling The Adjustable Strap Until Tight
• Product Has A Sewn-in Pull Loop On The Adjustable Strap For Easy Tightening
• Fixed End Strap Is Not Sewn To The Cam Buckle, Fixed End Strap Has A Flat Hook That Can Be Connected/disconnected Quickly From The Back Of The Buckle
• The End Of Both The Fixed End And Adjustable Strap Are Endless, There Are No Hooks Or End-fittings On Either End
• The Endless Ends Must Be Secured In Some Manner, Such As Mounting Or Using Hardware Like A Three Bar Slide. Always Remember, The Strength Of The Tie-down Is Only As Strong As The Anchor Points, So Make Sure The Endless Ends Are Secured Equally Strong As The Tie-down Rating
• Utility Style Cam Buckle With A Push Trigger On The Top For Easy Release
• Cam Buckle Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
• Flat Hook On Fixed End Has A Long Neck To Allow Connection To The Back Of The Cam Buckle
• Flat Hook Is Made Of Steel Has A Zinc-yellow Plated Finish For Superior Weather Protection
• Strap Is Made With 3000 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As The Webbing Portion, The Cam Buckle And Flat Hook Are Not Included In The Measurement
• Sewn In The Standard Method To Meet Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn On The Fixed End Strap Strap Near The Flat Hook