HOME

• Tie-downs, Boat Winch Strap, Flat Sewn Loop On One End, Snap Hook On Opposite End, Safety Strap With Snap Hook Extending From First Hook
• Boat Winch Strap Configuration With Safety Strap, Loop On One End, Forged Eye Snap Hook And Safety Strap With A Forged Eye Snap Hook
• Safety Strap Is 10 Inches Long, Not Including The Hook
• 1 Inch Flat Loop On Opposite End Of Strap Is For Attachment To Pin Inside Boat Winch. 1 Inch Flat Loop Can Fit Over A 1/2 Inch (0.50) Inch Diameter Pin
• Snap Hooks Have A Spring Loaded Keeper To Prevent Unintentional Disconnects After Attachment
• 10M Forged Snap Hook Is The Heavy Duty Version For The Highest Strength Or Durability
• Snap Hooks Are Made Of Steel And Have A Zinc-silver Plated Finish
• Strap Is Made With 6000 Lb Seatbelt Style Polyester Webbing. Webbing Nominal Thickness Is 0.049 Inch (1.2mm)
• Sewn With Silver Polyester Thread
• Strap Length Is Measured As The Webbing Portion Only Including The Flat Sewn Loop, The Hooks Are Not Included In The Measurement
• Sewn In The Standard Method To Meet Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn Into The Strap Next To The Primary Hook
• Strap Has A Spool Diameter Of 4 Inches When Completely Wound Up

• If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up