HOME

• Rack-strap, Rack-strap Tie-downs, J Hook On One End
• Rack-Strap Universal Replacement Strap, Replacement Strap For All Current And Past Models Of Rack-Strap Tie-downs
• Replacement Includes New Spindle Hardware, Plastic Knob And Replacement Strap With Hook
• The Rack-Strap Tie-down Strap Is Contained Inside The Rack-Strap Frame And The Replacement Must Be Installed In The Same Manner As The Original
• To Prepare The Replacement, Remove The Nut From Inside The Cavity Of The Plastic Knob, Unscrew The Knob Off The Threaded Stud And Remove The Snap Ring From The Spindle. After Those Steps, The Old Spindle Will Pull Out Of The Frame And The Old Strap Can Be Removed
• To Properly Install The New Strap And Spindle, Follow The Installation Sheet Provided With The Product
• J Hook On The End Of The Strap Is The Double J Configuration And Has A Special Back Bend To Fit The Rack-Strap Frame
• Double J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
• All Attached Rack-Strap Hardware Has A Zinc-yellow Plated Finish
• Strap Is Made With 4500 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Length Is Measured As The Total Maximum Length When The Strap Is Fully Extended From The Frame
• Sewn In The Standard Method To Meet The Provided Strength Rating
• Rack-Strap Brand Strap Warning Label Sewn On The Hook End Of The Strap
• The Product Is The Rack-Strap Replacement Strap Kit Only, It Does Not Include The Tightening Rod
• No Prep Packaing, No Instruction Sheet, Store In Bulk