1.5 INCH CAM BUCKLE TIE DOWNS

• Tie-downs, Cam Buckle Tie-down, Flat Hook On Both Ends
• One Piece Cam Buckle Tie-Down Configuration, Made Up Of A Fixed End Strap Sewn To The Buckle And An Adjustable Strap Fed Through The Buckle Then Sewn So The Strap Is Not Removable
• Cam Buckles Are Pulled Tight By Hand, There Is No Mechanical Tightening Mechanism
• The Adjustable Strap Is Sewn Through The Buckle With A Pull Loop To Make Tightening Easier
• Flat Hooks Are Orientated So The Hook Curvature Faces Down Relative To The Buckle Lying Flat
• Cam Buckle Is The Utility Style Cam Buckle. This Type Of Cam Buckle Is Intended To Have The Adjustable Strap Loaded During Assembly An Left Inside The Buckle. It Is Not To Be Fed And Removed Repeatedly. The Adjustable Strap Is Loaded Through The Middle Opening On The Bottom Side Of The Buckle And Fed Back Thru The Teeth Of The Cam Buckle
• Cam Buckle Is Made Of Steel And Has A Zinc-silver Plated Finish
• Narrow Flat Hooks Are Commercial Grade For Great Strength And Durability
• Narrow Flat Hooks Are Made Of Steel And Have A Zinc-yellow Plated Finish
• 6M Narrow Flat Hook Has A 2 Inch Webbing Slot Opening, But The Hook Tip Has A Narrower Width Of 1.7 Inches
• Strap Is Made With 4500 Lb Polyster Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As The Webbing Length Only, Buckle And Flat Hooks Are Not Included In The Length Measurement
• Product Is Sewn In The Standard Method To Meet The Provided Strength Rating
• This Product Is Made With 1.5 Inch Webbing And A 2 Inch Hook. The Webbing Slot In The Hook Will Allow The Strap To Move Slightly Side To Side
• CustomTieDowns Strap Warning Tag Sewn On The Adjustable Strap Near The Flat Hook