2 INCH RATCHET TIE DOWNS

• Tie-downs, Ratchet Strap, Chain Anchor On One End, Twisted Snap Hook With D-ring On Opposite End
• Two Part Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Ratchet Spindle And Tightened During Use
• Direct Attach 18 Inch Chain Anchor On The Fixed Side Of The Ratchet. The Chain Anchor Is Installed Directly On The Bolt Of The Ratchet
• The Chain Anchor Is Used By Wrapping The Hook End Around An Anchor Point And Then Connecting The Hook On A Link In The Chain Forming A Loop
• There Is A Twisted Snap Hook On The End Of The Adjustable Strap
• The Twisted Snap Hook Is Orientated, Hook Facing Down, Relative To The Buckle Lying Flat
• The Twisted Snap Hook Has A Retainer Clip On The Hook To Help Prevent The Hook From Accidentally Disconnecting
• A D-ring Is Sewn 24 Inches From The Twisted Snap Hook On The Adjustable Strap
• The Combination Twisted Snap Hook And D-ring Is Used By Connecting The D-ring And Snap Hook, Forming A Loop
• There Is A Protective Sleeve Between D-ring And Twisted Snap Hook To Help Prevent Premature Wear
• Heavy Duty Grade 11M Ratchet Buckle Designed For The Highest Strength And Durability
• Ratchet Is Made Of Steel. The Frame Of The Ratchet Has A Zinc-yellow Plated Finish And The Grip Is Made Of Ribbed Aluminum
• Ratchet Has The Standard Single Locking Configuration
• Ratchet Has A Long Wide Handle That Provides The Highest Amount Of Leverage And Makes Operation Easier While Wearing Gloves
• Heavy Duty Grade 16M Chain Anchor Provides The Highest Strength And Durability Available
• Chain Anchor Is Made Of Steel And Has A Zinc-yellow Plated Finish
• Heavy Duty Grade 10M Twisted Snap Hook Provides The Highest Strength And Durability Available
• Twisted Snap Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish
• Heavy Duty 10M Flat Stampled D-ring Provides The Highest Strength And Durability Available
• Flat Stampled D-ring Is Made Of Steel And Has A Zinc-yellow Plated Finish
• Strap Is Made With Heavy Duty 12000 Lb Polyester Tie-down Webbing
• Sewn With White Polyester Thread
• The Fixed End Strap Length Is Only The Length Of The 18 Inch Chain Anchor, There Is No Webbing On The Fixed End. The Adjustable Strap Length Is Measured From The Loose End Of The Strap To The D-ring. The D-ring, The 24 Inch Extension And Twisted Snap Hook Are Not Included In The Adjustable Strap Measurement
• Sewn In The Standard Method To Meet Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn On The Hook End Of Both The Fixed End And Adjustable Strap