2 INCH RATCHET TIE DOWNS

• Tie-downs, Ratchet Strap, S Hook With Retainer Clip On One End, Narrowed Sewn Loop On The Opposite End
• Two Part Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Ratchet Spindle And Tightened During Use
• There Is A S Hook With Retainer Clip Sewn On The End Of The Fixed End Strap
• S Hook With Retainer Clip Hooks Onto An Anchor Point And The Retainer Clip Helps Prevent The Hook From Unintentional Disconnects
• The Retainer Clip Does Reduce The S Hook Opening Clearance, Always Make Sure The Clearance When Retainer Clip Is Engaged Is Enough To Connect To The Anchor Point
• 5 Inch Narrowed Sewn Loop On The End Of The Adjustable Strap
• Narrowed Sewn Loops Are Formed By Folding The Tip Of The Loop In Half And Sewing. After Sewing, The Tip Of The Loop Is 1/2 The Width Of The Original Webbing When Finished
• The 5 Inch Loop Length Is Measured When The Loop Is Lying Flat. 5 Inch Loop Length Has A 10 Inch Circumference And Will Fit Over A 3 Inch Diameter Round Bar
• Ratchet Is A Commercial Grade Buckle For Great Strength And Durability
• Ratchet Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
• Ratchet Has The Standard Single Locking Configuration
• Ratchet Has A Wide Handle That Makes Operation While Wearing Gloves Easier
• S Hook With Retainer Clip Is The Heavy Duty Version For The Highest Strength And Durabiltiy
• S Hook Is Made Of Steel And Has A Black Vinyl Coating To Help Prevent It From Scratching The Surroundings. The Retainer Clip Is Made Of Steel And Has A Zinc-silver Finish
• S Hook With Retainer Clip Is The Standard Configuration, It Is Designed To Fit Onto Sewn Loop Or Ring. When The Retainer Clip Is Pressed-in And Is At Its Lowest Point, The Clearance Is 0.35 Inches Between The Clip And The S Hook
• Strap Made With 6000 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyester Thread
• Fixed End Length Is Measured As The Webbing Portion Only. The Adjustable Strap Length Is Measured As The Webbing Portion Including The Length Of The Sewn Loop. The Ratchet And Hook Are Not Included In The Measurement
• Sewn In The Standard Method To Meet Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Fixed End And Adjustable Strap