BOAT WINCH STRAPS - 4 INCH
PRODUCT NUMBER : 6936
|
|
|
$27.09 per each |
|
|
|
|
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528 |
Change Strap Length (feet): |
|
|
|
|
|
CUSTOM IMPRINT
|
|
SEE ALL VARIATIONS OF PRODUCT 6936
|
PRODUCT NOTES:
- Tie-downs, Strap Extender, Flat Sewn Loop On One End, Combination Of D-ring, Connector Clevis And Snap Hook On Opposite End
- Strap Extender Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
- 1 Inch Flat Loop On The End Of The Strap Can Be Attached To A Bolt Or To The Pin Inside A Boat Winch. 1 Inch Flat Loop Can Fit Over A 1/2 Inch (0.50) Inch Diameter Bolt Or Pin
- Combination Of D-ring, Clevis Connector And Snap Hook On The Opposite End To Reduce Stress On The Webbing At The Hook End
- D-ring In The Combo Provides The Strap A Lesser Wear Point
- Clevis Connector Allows The Snap Hook To Be Connected To The D-ring
- Snap Hook On The End Has A Spring Loaded Keeper To Prevent Unintentional Disconnects After Attachment
- 2 Inch 10M Wire D-ring Is Made From 3/8 Inch Steel Wire. Combination Of 2 Inch D-ring Sewn To 4 Inch Webbing
- D-ring Is Made Of Steel And Has A Zinc-yellow Plated Finish
- 10M Forged Snap Hook Is Slightly Thicker Than The Corresponding Flat Snap Hook
- Clevis Connector Is Made Of Steel And Has A Zinc-yellow Plated Finish
- Forged Snap Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
- Strap Is Made With 20000 Lb Polyester Tie-down Webbing. Webbing Nominal Thickness Is 0.072 Inch (1.8mm)
- Sewn With White Polyster Thread
- Strap Length Is Measured As The Webbing Portion Only Including The Flat Sewn Loop, The D-ring, Clevis Connector And Hook Are Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Combination Of D-ring, Clevis Connector And Snap Hook Is About 6 Inches In Length
- CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Strap
|
|
PRODUCT WARNINGS:
- If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up
|
|
INCLUDES (COMPONENTS & DETAILS): (Links below open a new window)
|
|
ADDITIONAL PRODUCT IMAGES
|
|
|
ADDITIONAL IMAGES (Strap Color May Not Match)
|
|
|
Assembled By: CustomTieDowns.com |
|
Product Weight: 3.40 lb per each |
|
2024-05-07
|
Variations of Product Type 6936
There are no variations of Product Type 6936 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.