1 INCH STRAP EXTENDERS

• Tie-downs, Strap Extender, Swiveling Snap Hook On One End, Flat Sewn Loop On The Opposite End
• Strap Extender Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
• Swiveling Snap Hook Sewn On One End Of The Strap And A 5 Inch Flat Sewn Loop Sewn On The Opposite End
• Swiveling Snap Hook Rotates 360 Degrees For Ease Of Connection
• The Swivel Snap Hook Has A Spring Loaded Keeper To Prevent Unintentional Disconnects After Attachment
• 5 Inch Flat Sewn Loop Is Formed By Folding The Strap Flat On Top Of Itself, There Is No Pinching, Narrowing Or Twisting Of The Strap
• 5 Inch Flat Sewn Loop Has A 10 Inch Circumference And Can Comfortably Fit Over A 3 Inch Diameter Round Bar
• Swiveling Snap Hook Is Desgned For Standard Duty Applications Such As Bags Or Leashes
• Swivel Snap Hook Is Made Of Zinc-diecast Metal And Has A Nickel Plated Finish
• Swiveling Snap Hook Has A Vertically Moving Trigger That Allows The Full Hook Opening To Be Available When Clipping On The Hook
• Strap Is Made With 3000 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyster Thread
• Length Is Measured From The Inside Edge Of The Hook To The Tip Of The Sewn Loop
• Sewn In The Standard Method To Meet Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn On The Loop End Of The Strap

• If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up