HOME

• Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
• Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Looped Around And Fed Through The Teeth Of The Cam Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
• Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
• End Of The Strap Has A 5 Inch Pull Loop Sewn In To Make Tightening Easier. The Pull Loop Also Prevents The Strap From Being Removed From The Buckle
• This Product Has A Sliding Cam Buckle Between The Primary Cam Buckle And The Pull Loop
• Cinch Style Buckle Has The Cinch Cambuckle Configuration Where The Strap Is Fed Bottom Of Buckle Thru Top Of Buckle And Pulled Tight
• Cinch Cam Buckle Is Made From Zinc-Diecast Metal And Has A Zinc-silver Finish. Zinc-Diecast Buckles Are Rust Proof
• Strap Is Made With 3000 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As The Webbing Only, The Buckle Is Not Included In The Length
• Sewn In The Standard Method To Meet The Provided Strength Rating
• No Strap Warning Tag Or Labeling On The Product
• No Instruction Sheet Included

• Cinch Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Cam Teeth From Top To Bottom, It Will Not Hold To The Proper Strength