HOME

• Tie-downs, Cam Buckle Tie-down, Sewn Loop With 1/2 Twist On Both Ends
• One Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
• Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
• Product Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier
• 3 Inch Sewn Loop With A Half Twist On The End Of Both The Fixed End And Adjustable Strap
• Sewn Loop With Half Twist Is Formed By Folding Over The Webbing And Twisting The Webbing Over One Time, Then Sewn. The Half Twist Orientates The The Loop Perpendicular From The Webbing Lying Flat
• The Loop Is Not Pinched Or Narrowed, Only 1/2 Twisted. The Tip Of The Loop Is Still The Same Width As The Webbing
• The 3 Inch Length Is Measured When The Loop Is Lying Flat, It Is Equivalent To Approximately 1/2 The Circumference
• The 3 Inch Loop Can Fit Over A 1.75 Inch Diameter Round Bar
• Utility Style Cam Buckle Is Designed For The Webbing To Be Pre-installed During Production, Fed From The Bottom Middle Frame Opening And Through The Cam Teeth
• Cam Buckle Is Made Of Steel And Has A Black Resin Finish
• Strap Is Made With Heavy Duty 4500 Lb Flat Polyester Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As The Webbing Portion Only Including The Length Of The Loop, The Cam Buckle Is Not Included In The Measurement
• Sewn In The Standard Method To Meet Listed Strength Rating
• Sewn With The Standard Stitch
• CustomTieDowns Strap Warning Tag Sewn Next To The Loop On The End Of The Adjustable Strap