HOME
PRODUCT NUMBER : 2251
|
|
|
$8.69 per each |
PRODUCT MODEL: |
2251-Y5.5-0.50 |
|
|
|
|
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528 |
Change Fixed End Strap Length (feet): |
|
|
Change Adjustable Strap Length (feet): |
|
|
|
|
|
CUSTOM IMPRINT
|
|
SEE ALL VARIATIONS OF PRODUCT 2251
|
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, Bolt Plate On Both Ends
- Two Piece Cam Buckle Tie-Down Configuration, Made Up Of A Fixed End Strap Sewn To The Buckle And A Seperate Removable Adjustable Strap. The Adjustable Strap Must Be Fed Through The Buckle Correctly Then Pulled Tight
- This Product Is A Special Combination Using A Utility Cam Buckle And Not Pre-feeding The Strap Through The Buckle. Utility Cam Buckles Are Not Designed For Repeated Removal And Insertion Of The Strap. Please See Strap Feed Warnings For More Information
- Cam Buckles Are Pulled Tight By Hand, There Is No Mechanical Tightening Mechanism
- The Bolt Plate Sewn On The End Of Each Strap Has A Slight Angle Bend In The Frame
- Bolt Plates Are Orientated, Bend Angle Up, Relative To The Buckle Lying Flat
- Cam Buckle Is A Utility Style Cam Buckle. Utility Style Cam Buckles Are Designed For Feeding The Strap From Underneath The Buckle And Out The Front One Time And Leaving The Strap There. Due To The Difficulty Of The Loading Process, It Is Not Recommended For Repeated Feeding And Removing Of The Strap
- Cam Buckle Is Made Of Steel And Has Zinc-yellow Plating On The Frame And Zinc-silver Plating On The Trigger For Superior Weather Protection
- Angled Bolt Plate Is A Commercial Grade End-fitting For Great Strength And Durability
- Bolt Plates Are Made Of Steel And Have A Zinc-yellow Plating For Superior Weather Protection
- Bolt Plate Is Designed To Be Mounted Using A 1/2 (0.50) Bolt
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Length Only, Buckle And Bolt Plates Are Not Included In The Length Measurement
- Product Is Sewn The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn Next To The Bolt Plate On The Adjustable Strap
|
|
PRODUCT WARNINGS:
- Utility Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Back Through The Front In Order To Properly Hold The Strap After Tightening. The Strap Can Be Loaded From The Middle Opening On The Bottom Of The Buckle And Fed Through The Teeth Back To Front Also. NEVER Load The Strap Through The Cam Teeth From Front To Back, It Will Not Hold To The Proper Strength
|
|
INCLUDES (COMPONENTS & DETAILS): (Links below open a new window)
|
|
Assembled By: CustomTieDowns.com |
|
Product Weight: 0.65 lb per each |
|
2024-05-07
|
Variations of Product Type 2251
There are no variations of Product Type 2251 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.