HOME

• Tie-downs, Cam Buckle Tie-down, Sewn Loop With 1/2 Twist On Both Ends
• Two Part Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And A Separate Adjustable Strap That Must Be Fed Through The Buckle Before Tightening
• Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
• Cinch Style Cam Buckle Requires The Loose End Of The Adjustable To Be Fed Through The Teeth From The Bottom And Up Through The Top To Properly Hold, Never Load Top To Bottom
• 5 Inch Sewn Loop With A Half Twist On The End Of Both The Fixed End And Adjustable Strap
• Sewn Loop With Half Twist Is Formed By Folding Over The Webbing And Twisting The Webbing Over One Time, Then Sewn. The Half Twist Orientates The The Loop Perpendicular From The Webbing Lying Flat
• The Loop Is Not Pinched Or Narrowed, Only 1/2 Twisted. The Tip Of The Loop Is Still The Same Width As The Webbing
• The 5 Inch Length Is Measured When The Loop Is Lying Flat, It Is Equivalent To Approximately 1/2 The Circumference
• The 5 Inch Loop Can Fit Over A 3 Inch Diameter Round Bar
• Commercial Duty Cam Buckle For Great Strength And Durability
• Cam Buckle Frame Is Made Of Zinc-diecast Material And Has A Black Resin Finish
• Strap Is Made With 3000 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As The Webbing Portion Only Including The Length Of The Loop, The Cam Buckle Is Not Included In The Measurement
• Sewn In The Standard Method To Meet Listed Strength Rating
• Sewn With The Smallest Tie-down Stitch
• Product Does Not Have A Strap Tag Or Labels Sewn On