HOME

• Tie-downs, Quick Release Tie-down, S Hook On One End, Bolt Plate On Opposite End
• Two Part Quick Release Configuration, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle And Is Fed Thru The Buckle, Then Tightened
• Quick Release Buckles, Also Called Flip Buckles, Snap Closed By Flipping The Buckle Over. Proper Feeding And Operation Is Necessary For The Buckle To Hold The Webbing
• S Hook Sewn On The End Of The Fixed End Strap
• Bolt Mounting Plate Sewn On The End Of The Adjustable Strap Has A Slight Bend Angle And The Bend Is Orientated, Bend Angle Up, Relative To The Buckle Laying Flat
• Quick Release Buckle Is A Commercial Grade Buckle For Great Strength And Durability
• Quick Release Buckle Is Made From 304 Grade Stainless Steel
• S Hooks Are The Standard S Hook Configuration, One Closed End, One Open Hook End. The Open Hook End Has A Diameter Larger Than 1 Inch To Fit Over A 1 Inch Diameter Bar Such As A Handlebar
• S Hook Is Made From 304 Grade Stainless Steel
• Bolt Plates Are Designed To Be Mounted With A 1/2 (0.50) Bolt
• Bolt Plate Is Made Of Steel And Has A Zinc-yellow Plated Finish
• Strap Is Made With 3000 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
• Product Is Sewn In The Standard Method To Meet The Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn On The Bolt Plate End Of The Adjustable Strap