HOME

• Tie-downs, Cam Buckle Tie-down, E-fitting On One End
• 1 Piece Cam Buckle Configuration With An Adjustable Strap Fed Through The Buckle So It Can Be Tightened
• Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
• Adjustable Strap Is Pre-fed Through The Cam Buckle During Manufacturing, But No Pull Loop Or Tab Is Sewn In, The Strap Can Be Removed If Pull Out Of The Buckle
• The E-fitting Is Sewn On Each End Of The Tie-down Straps And Universally Fit E-series Logistic Track
• E-fittings Have A Release Pin On One End That Allows Them To Disengage From The E-track. On This Tie-down, The Release Pin Is Orientated So It Faces Up As Illustrated
• CB2 Series Cam Buckle Is A Utility Style Cam Buckle With Push Down Relase Trigger. Utility Style Cam Buckles Must Have The Strap Loaded From The Middle Opening Underneath The Buckle, Then Fed Back Out The Teeth Of The Buckle
• Cam Buckle Is Made Of Steel And Has Zinc-silver Plated Finish
• Spring E-fittings Are Universal And Fit All E Series Logistic Track
• Spring E-fitting Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
• Strap Is Made With Extra Heavy Duty 12000 Lb Polyester Tie-down Webbing
• Sewn With White Polyester Thread
• Strap Lengths Are Measured As The Webbing Portion Only, The Cam Buckle And E-fittings Are Not Included In The Measurement
• Sewn In The Standard Method To Meet The Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Adjustable Strap