HOME

• Tie-downs, Side Release Tie-down, Flat Sewn Loop On Both Ends
• Two Piece Side Release Buckle Configuration Has A Fixed End Sewn To The Back Of The Female Clip And An Adjustable Strap Permanently Fed Through The Male Clip To Prevent Removal
• Side Release Buckle Is Unclipped By Pressing On The Sides Of The Male Clip Until It Releases From The Female Clip
• Side Release Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
• The Adjustable Strap Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier. The Pull Loop Also Prevents The Adjustable Strap From Being Removed From The Male Clip
• 5 Inch Flat Sewn Loop On The End Of Both The Fixed End And Adjustable Strap
• Flat Sewn Loops Are Formed By Folding The Webbing Flat Over On Top Of Itself, There Is No Twisting, Narrowing Or Pinching Of The Webbing
• The 5 Inch Loop Has A Circumference Of 10 Inches And Can Fit Over A 3 Inch Diameter Bar
• Light Duty Side Release Buckle For Light Commercial And General Applications
• The Male Clip Of The Plastic Side Release Buckle Has A Built In Strap Adjuster To Make Length Adjustment Capable
• Side Release Buckle Is Made Of Black Plastic Material
• Strap Is Made With Heavyweight Polypropylene Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As The Webbing Portion Only Including The Length Of The Loop, The Buckle Is Not Included In The Measurement
• Sewn In The Standard Method For The Functionality Of The Product
• No Strap Tag Or Label Sewn On The Product