Details:
- 1.5 Inch Cam Buckle Tie Down
- CB15Z-1M 1.5 Inch Cam Buckle, Zinc-Silver
- Combination CHS1V-1M Vinyl Coated S Hook With 18 Inch Soft Loop On Fixed End, CHE2-4MOR Spring E-fitting with O-ring On End Of Adjustable Strap With Sewn-in Pull Loop
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW15-Y4PE 1.5 Inch 4M Yellow Polyester Tie-Down Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.28 lb
$17.29 Each
10+ = $15.65
50+ = $14.13
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, Combination Of S Hook With Retainer Clip And Soft Loop On One End, E-fitting On The Opposite End
- One Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
- Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
- Product Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier
- There Is A Combination Flat Sewn Loop And S Hook On The Fixed End Strap
- The Flat Loop On The End Of Each Strap Is 5 Inch Long When Laid Flat. The Sewn Loop Can Be Used With The S Hook Or Without
- 5 Inch Flat Sewn Loops Have A 10 Inch Circumference And Can Comfortably Fit Over A 3 Inch Diameter Round Bar
- The S Hook Is Sewn 18 Inches From The Tip Of The Sewn Loop And Can Be Used Without Or Without The Sewn Loop
- Standard Operation Is To Wrap The Loop Around A Handle Bar Or Anchor Point, Then Connect The Loop Onto The S Hook
- Spring E-fitting Sewn On The End Of The Adjustable Strap Universally Fits E Series Logistic Track
- E-fitting Has A Ring Attached, Where The Strap Is Sewn To
- Spring E-fittings Have A Spring Loaded Release Pin That Is Pressed To Secure And Disonnect The Fitting In The Track
- Commercial Duty Cam Buckle For Great Strength And Durability
- Cam Buckle Is Made Of Steel And Has A Zinc-silver Plated Finish
- Commercial Duty S Hook For Great Strength And Durabiltiy
- S Hook Is Made Of Steel And Has A Black Vinyl Coating To Help Prevent Them From Scratching Their Surroundings
- S Hooks Are The Standard S Hook Configuration, One Closed End, One Open Hook End. The Open Hook End Has A Diameter Larger Than 1 Inch To Fit Over A 1 Inch Diameter Bar Such As A Handlebar
- Heavy Duty Spring E-fitting For The Highest Strength And Durability
- Strap Is Made With 4500 Lb Polyster Tie-down Webbing
- Sewn With Silver Polyester Thread
- Fixed Strap Length Is Measured As The Distance Between The Back Of The Ratchet And The Beginning Of The S Hook. The Fixed Length Does Not Include The Cam Buckle, The S Hook Or The Soft Loop Portion. The Adjustable Strap Length Is Measured As The Webbing From The Front Of The Buckle To The Hook And Does Not Include The Buckle Or The Hook
- Sewn In The Standard Method To Meet Provided Strength Rating
- CTD Strap Warning Tag Sewn On The E-fitting End Of The Adjustable Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 5025
There are no variations of Product Type currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
