Details:
- 1.5 Inch Strap
- CHJ15-4M double j wire hook on one end, 1 inch flat loop for attachment to the bolt of a ratchet on the opposite end
- Total Strap Length 1 Ft (12 Inches)
- CW15-Y4PE 1.5 Inch 4M Yellow Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.35 lb
$5.39 Each
10+ = $4.83
50+ = $4.36
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, J Hook On One End, Flat Sewn Loop On Opposite End
- Strap Extender Configuration, No Buckle Or Tightening Device, Only A Strap With A Double J Hook One End And 1 Inch Flat Sewn Loop On Opposite End
- Double J Hook Is Sewn On The Strap Orientated, Hook Facing Down, Relative To The Fold And Stitching
- Double J Hook Has Is Formed By Bending A Single Piece Of Wire In The Shape Of A J And Both Ends Of The Wire Are Brought Together To Form The Tip Of The Hook
- 1 Inch Flat Sewn Loop Is Formed By Folding Over The Webbing Flat Onto Itself, No Twisting, Narrowing Or Pinching Of The Strap
- 1 Inch Flat Sewn Loop Length Has A 2 Inch Circumference And Can Comfortably Fit Over A 1/2 (0.50) Inch Diameter Round Bar Or Bolt
- The Product Is Commonly Used A Replacement Fixed End Strap For A Ratchet Strap
- Commercial Duty Double J Hook For Great Strength And Durability
- J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protectioin
- Strap Is Made With 4500 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured From The Inside Edge Of The J Hook To The Tip Of The Flat Sewn Loop
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CTD Strap Warning Label Sewn On The Hook End Of The Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 3952
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 13163 | End-fitting/hook Is Made Of 304 Grade Stainless Steel |
