Details:
- 2 Inch Quick Release Tie-Down
- Black Protective Pad With Hook And Loop Security Strap Sewn Under Buckle
- CQR2K-1M 2 Inch Black/Yellow Quick Release Buckle
- CHS1V-1M Vinyl Coated S hook on each end
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW2-Y6PE 2 Inch 6M Yellow Polyester Tie-Down Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.13 lb
$22.39 Each
10+ = $20.33
50+ = $18.34
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Quick Release Tie-down, S Hook On One End, S Hook On Opposite End
- Two Part Quick Release Configuration, Made Up Of A Fixed End And Adjustable Strap
- Adjustable Strap Is Separate From The Buckle And Is Fed Thru The Buckle, Then Tightened
- Quick Release Buckles, Also Called Flip Buckles, Snap Closed By Flipping The Buckle Over. Proper Feeding And Operation Is Necessary For The Buckle To Hold The Webbing
- A Protective Pad Is Sewn Under The Buckle To Help Prevent The Buckle From Scratching Its Surroundings
- Protective Pad Has A Sewn On Hook And Loop Strap That Wraps Around The Buckle To Hold It Closed And To Hold Excess Webbing
- There Is An S Hook Sewn On The End Of Both The Fixed End Strap And Adjustable Strap
- The S Hook Openings Are Orientated So They Face The Same Direction
- This Product Is Commonly Used As A Transom Strap For Securing The Back End Of A Boat
- Standard Duty Quick Release Buckle For Proper Strength And Durability
- Quick Release Buckle Is Made Of Steel. The Frame Has A Black Resin Finish And The Wire Bale Has A Zinc-yellow Plated Finish
- Commercial Duty S Hook For Great Strength And Durability
- S Hooks Are Made Of Steel And Have A Black Vinyl Coated Finish To Help Prevent The Hook From Scratching Its Surroundings
- S Hooks Are The Standard S Hook Configuration, One Closed End, One Open Hook End. The Open Hook End Has A Diameter Larger Than 1 Inch To Fit Over A 1 Inch Diameter Bar Such As A Handlebar
- Strap Is Made With 6000 Lb Polyester Tie-down Webbing. Protective Pad Is Made Of Heavyweight Polypropylene Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CTD Strap Warning Tag Sewn On The Hook End Of Both The Fixed End And The Adjustable Strap
- Black Protective Pad Is Made Of Heavyweight Polypropylene Webbing
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 7308
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 8134 | Made With Single Sided Sublimated Flat Polyester Webbing |
| 8693 | End-fitting/hook Is Made Of 304 Grade Stainless Steel |
| 8696 | Buckle Is Made Of 304 Grade Stainless Steel |
