Details:
- 4 Inch Ratchet Strap
- CR4-24M 4 Inch 24M Ratchet With Long Wide Handle Aluminum Grip
- 18 Inch CHC4-18M Chain Anchor on fixed end, 5 Inch Pieced sewn loop with black protective sleeve around loop tip on adjustable strap
- Fixed End 1 Ft (12 Inches)
- Adjustable Strap 26 Ft
- Total Strap Length 27 Ft (324 Inches)
- CW4K-Y20PE 4 Inch 20M Yellow Polyester Tie-Down Webbing With Black Edges
- 14000 lb Break Strength
- 4,667 lb Working Load Limit
- Assembled in the USA
Product Weight: 18.86 lb
$114.09 Each
10+ = $103.89
50+ = $93.75
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Ratchet Strap, Chain Anchor On One End, Pieced Sewn Loop On The Opposite End
- Two Part Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Ratchet Spindle And Tightened During Use
- 18 Inch Chain Anchor Is Sewn On The Fixed End Strap And A 5 Inch Pieced Sewn Loop Is Sewn On The End Of The Adjustable Strap
- Chain Anchors Are Made Up Of A Ring, Chain And Grab Hook And Can Be Used By Hooking The Grab Hook Directly Or Connecting It Back To The Chain
- 5 Inch Pieced Sewn Loop Is Formed By Using Webbing Half The Width Of The Primary Strap, Forming A Loop Out Of It And Sewing The Narrower Webbing Onto The Primary Strap
- The 5 Inch Loop Length Has A Circumference Of 10 Inches And Will Fit Over A 3 Inch Diameter Round Bar
- The Tip Of The Pieced Sewn Loop Is Folded In Half And Sewn So That The Tip Width Is 1/4 The Width Of The Primary Strap
- Protective Sleeve Is Placed Around The Narrowed Tip To Help Prevent Premature Wear
- Heavy Duty Ratchet For The Highest Strength And Durability
- Ratchet Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Ratchet Has A Standard Single Locking Configuration For The Easiest Ratcheting Operation
- Ratchet Has A Long Wide Handle For The Greatest Leverage And Ease Of Use While Wearing Gloves
- Ratchet Handle Grip Is Made Of Aluminum
- Heavy Duty Chain Anchor Is 18 Inches Long And Made With 3/8 Inch Chain And Grab Hook
- Chain Anchor Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Strap Is Made With Heavy Weight 20000 Lb Polyester Tie-down Webbing
- Sewn With White Polyester Thread
- Strap Lengths Are Measured As The Webbing Portions Only Including The Length Of The Sewn Loop. The Buckle And Chain Anchor Are Not Include In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On Both The Fixed End And Adjustable Strap
- Protective Sleeve Made With High Abrasion Resistant Black Polyester
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 4326
There are no variations of Product Type currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
