Details:
- Rack-Strap RSL1 Low Profile, Gold
- RSL1 Zinc-Yellow Plated RSL1 Low Profile Frame
- Total Strap Length 8 Ft (96 Inches)
- CWS15-K4PE 1.5 Inch 4M Black Polyester Tie-Down Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Manufactured in the USA
Product Weight: 2.9 lb
$47.49 Each
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Rack-strap, Rack-strap Tie-downs, J Hook On One End
- Rack-Strap Tie-Down, Mountable Ratchet Strap For Truck And Van Ladder Racks
- Mounting Bracket Can Be Bolted Or Welded Directly To The Ladder Rack So The Tie-down Permanently Mounted And Always Ready For Use
- For Proper Use, The Strap Is Pulled Out From The Spool, Fed Under The Ladder Or Cargo, Brought Back Over The Cargo Untill The Hook Reaches Back To The Rack-Strap Frame. The Hook Is Then Connected To The Frame On The Front Pin And Ratcheted Tight
- Rack-Strap Offers Two Tightening Options, The Provided Tightening Rod Or 1/2 Inch Nut On The End Of The Drive Axle
- The Black Knob Is Provided As A Method Of Winding Up The Loose Strap Or Removing Any Slack, But Never Use The Knob To Tighten The Tie-down
- Rack-Strap Mounting Bracket Is The Low Profile Right Angle Configuration That Fits Square Or Rectangular Tubing That Is 1 X 1 Inch Or Greater. Low Profile Is Designed To Fit Ladder Racks Where Clearance Between The Rack And Top Of The Vehicle Is Limited, Such As Mounting Over A Door Or Tool Box
- Rack-strap Frame Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- J Hook On The End Of The Strap Is The Double J Configuration And Has A Special Back Bend To Fit The Rack-Strap Frame
- Double J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- All Attached Rack-Strap Hardware Has A Zinc-yellow Plated Finish
- Strap Is Made With 4500 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured As The Total Maximum Length When The Strap Is Fully Extended From The Frame
- Sewn In The Standard Method To Meet The Provided Strength Rating
- Rack-Strap Brand Strap Warning Label Sewn On The Hook End Of The Strap
- Stock Assembly, No Tightening Rod, Bolt Kit Or Instruction Sheet
- No Prep Packaing, No Instruction Sheet, Store In Baskets
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Products Using This Component
Variations of Product Type 7502
There are no variations of Product Type 7502 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
PRODUCT MODELING
Top = 6 arrow_forward Group = 55 arrow_forward Layout = 84 arrow_forward Config = 2205 arrow_forward Family = 4154 arrow_forward Type = 7502
Top = 6 arrow_forward Group = 55 arrow_forward Layout = 84 arrow_forward Config = 2205 arrow_forward Family = 4154 arrow_forward Type = 7502
