Details:
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Manufactured in the USA
Product Weight: 5.6 lb
$59.99 Each
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Rack-strap, Rack-strap Tie-downs, J Hook On One End
- Rack-Strap Tie-Down, Mountable Ratchet Strap For Truck And Van Ladder Racks, Includes Adapter For Use With Specific Crossbar Only Van Racks
- The Rack-Strap And Adapter Are Designed So The Tie-down Is Permanently Mounted And Always Ready For Use
- For Proper Use, The Strap Is Pulled Out From The Spool, Fed Under The Ladder Or Cargo, Brought Back Over The Cargo Untill The Hook Reaches Back To The Rack-Strap Frame. The Hook Is Then Connected To The Frame On The Front Pin And Ratcheted Tight
- Rack-Strap Offers Two Tightening Options, The Provided Tightening Rod Or 1/2 Inch Nut On The End Of The Drive Axle
- The Black Knob Is Provided As A Method Of Winding Up The Loose Strap Or Removing Any Slack, But Never Use The Knob To Tighten The Tie-down
- Rack-Strap Mounting Bracket Is The Low Profile Right Angle Configuration That Fits The Provided Van Adapter Pre-drilled Mounting Holes
- Rack-strap Frame Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- J Hook On The End Of The Strap Is The Double J Configuration And Has A Special Back Bend To Fit The Rack-Strap Frame
- Double J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Van Adapter Is Made Of Steel And Has A Black Powdercoated Finish
- Strap Is Made With 4500 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured As The Total Maximum Length When The Strap Is Fully Extended From The Frame
- Sewn In The Standard Method To Meet The Provided Strength Rating
- RS105 Van Rack Adapter Has An Extended Bar For Mounting The Rack-Strap And Two Legs For Mounting The Adapter To The Crossbar Only Van Rack. The Van Adapter Is Designed To Fit Van Rack Models Such As
- Weather Guard 205 And 216 All Purpose Van Racks
- American Van All Purpose Van Racks
- Older Model Adrian Steel Van Racks
- Rack-Strap Brand Strap Warning Label Sewn On The Hook End Of The Strap
- Includes The Bolt Mounting Kit For Installation
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 1123
There are no variations of Product Type 1123 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
PRODUCT MODELING
Top = 6 arrow_forward Group = 55 arrow_forward Layout = 84 arrow_forward Config = 4063 arrow_forward Family = 88 arrow_forward Type = 1123
Top = 6 arrow_forward Group = 55 arrow_forward Layout = 84 arrow_forward Config = 4063 arrow_forward Family = 88 arrow_forward Type = 1123
