Details:
- 2 Inch Quick Release Tie-Down
- Black Protective Pad With Hook And Loop Security Strap Sewn Under Buckle
- CQR2S-1M 2 Inch Stainless Steel Quick Release Buckle
- CHS1S-1M Stainless steel s hook on end of fixed end, CFBP175S-5M Stainless Steel Angled Bolt Plate, Bend Angle up, on end of adjustable strap
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 4 Ft (48 Inches)
- Total Strap Length 4.5 Ft (54 Inches)
- CW2-BD6PE 2 Inch 6M Dark Blue Polyester Tie-Down Webbing
- 1000 lb Break Strength
- 333 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.19 lb
$37.09 Each
10+ = $33.69
50+ = $30.41
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
SPECIAL WARNINGS:
- Tie-downs, Quick Release Tie-down, S Hook On One End, Bolt Plate On Opposite End
- Two Part Quick Release Configuration, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle And Is Fed Thru The Buckle, Then Tightened
- Quick Release Buckles, Also Called Flip Buckles, Snap Closed By Flipping The Buckle Over. Proper Feeding And Operation Is Necessary For The Buckle To Hold The Webbing
- A Protective Pad Is Sewn Under The Buckle To Help Prevent The Buckle From Scratching Its Surroundings
- Protective Pad Has A Sewn On Hook And Loop Strap That Wraps Around The Buckle To Hold It Closed And To Hold Excess Webbing
- S Hook Sewn On The End Of The Fixed End Strap
- Bolt Mounting Plate Sewn On The End Of The Adjustable Strap Has A Slight Bend. The Bend In The Bolt Plate Is Orientated, Bend Angle Up, Relative To The Buckle Lying Flat
- This Product Is Commonly Used As A Transom Strap For Securing The Back End Of A Boat
- Quick Release Buckle Has Two Webbing Slots And A Wire Bale On The Back. Check Operating Instructions To Properly Feed The Buckle
- Quick Release Buckle Is Made From 304 Grade Stainless Steel
- 1M Series S Hook Is A Versatile Hook With A Hook Opening Diameter Of 1.1 Inch. The Hook Is Designed To Fit Over A 1 Inch Round Pipe Or Rod, Such As A Handlebar
- S Hook Is Made From 304 Grade Stainless Steel
- Bolt Plate On The Adjustable Strap Can Be Mounted With Up To A 5/8 Inch Diameter Bolt
- Bolt Plate Is Made From 304 Grade Stainless Steel
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
- Product Is Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Hook End Of Both The Fixed End And The Adjustable Strap
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW2-BD6PE | 2 Inch 6M Dark Blue Polyester Tie-Down Webbing | 6,000 lb | 2,000 lb |
| CW3-K24PP | 3 Inch Heavyweight Black Polypropylene Webbing | 2,400 lb | 800 lb |
| CFBP175S-5M | 1.75 Inch Stainless Steel Angled Bolt Plate | 5,000 lb | 1,667 lb |
| CHS1S-1M | Stainless Steel S Hook | 1,500 lb | 500 lb |
| CQR2S-1M | 2 Inch Stainless Steel Quick Release Buckle | 1,000 lb | 333 lb |
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Available Product Variations
Browse the default product for each available product type in this family. Color, length, and material can be adjusted on the product page.
PRODUCT MODELING
Top = 1 arrow_forward Group = 5 arrow_forward Layout = 96 arrow_forward Config = 579 arrow_forward Family = 579 arrow_forward Type = 1859
Top = 1 arrow_forward Group = 5 arrow_forward Layout = 96 arrow_forward Config = 579 arrow_forward Family = 579 arrow_forward Type = 1859
