Details:
- 2 Inch Quick Release Tie-Down
- Black Protective Pad With Hook And Loop Security Strap Sewn Under Buckle
- CQR2K-1M 2 Inch Black/Yellow Quick Release Buckle
- CHS1V-1M Vinyl coated s hook on end of fixed end, 5M Angled Bolt Plate, Bend Angle up, on end of adjustable strap
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 4 Ft (48 Inches)
- Total Strap Length 4.5 Ft (54 Inches)
- CW2-G6PE 2 Inch 6M Gray Polyester Tie-down Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.08 lb
$22.39 Each
10+ = $20.33
50+ = $18.34
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Quick Release Tie-down, S Hook On One End, Bolt Plate On Opposite End
- Two Part Quick Release Configuration, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle And Is Fed Thru The Buckle, Then Tightened
- Quick Release Buckles, Also Called Flip Buckles, Snap Closed By Flipping The Buckle Over. Proper Feeding And Operation Is Necessary For The Buckle To Hold The Webbing
- A Protective Pad Is Sewn Under The Buckle To Help Prevent The Buckle From Scratching Its Surroundings
- Protective Pad Has A Sewn On Hook And Loop Strap That Wraps Around The Buckle To Hold It Closed And To Hold Excess Webbing
- S Hook Sewn On The End Of The Fixed End Strap
- Bolt Mounting Plate Sewn On The End Of The Adjustable Strap Has A Slight Bend. The Bend In The Bolt Plate Is Orientated, Bend Angle Up, Relative To The Buckle Lying Flat
- This Product Is Commonly Used As A Transom Strap For Securing The Back End Of A Boat
- Quick Release Buckle Has Two Webbing Slots And A Wire Bale On The Back. Check Operating Instructions To Properly Feed The Buckle
- Quick Release Buckle Is Made Of Steel. The Frame Has A Black Resin Finish And The Wire Bale Has A Zinc-yellow Plated Finish
- 1M Series S Hook Is A Versatile Hook With A Hook Opening Diameter Of 1.1 Inch. The Hook Is Designed To Fit Over A 1 Inch Round Pipe Or Rod, Such As A Handlebar
- S Hook Is Made Of Steel And Has A Black Vinyl Coated Finish To Help Prevent The Hook From Scratching Its Surroundings
- Bolt Plate On The Adjustable Strap Can Be Mounted With Up To A 5/8 Inch Diameter Bolt
- Bolt Plate Is Made Of Steel And Has A Zinc-yellow Plated Finish
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
- Product Is Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Hook End Of Both The Fixed End And The Adjustable Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 1858
There are no variations of Product Type 1858 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
