Details:
- 2 Inch Belt Strap
- No Strap Tag, CS2-2M Cinch Cam Buckle
- CHJW2-1M J hook sewn in one foot from the cam buckle, Remaining length of strap extending from the sewn-in J hook
- Total Strap Length 4 Ft (48 Inches)
- CW2K-BD12PE 2 Inch 12M Dark Blue Polyester Tie-Down Webbing With Black Edges
- Assembled in the USA
Product Weight: 0.93 lb
$13.29 Each
10+ = $12.05
50+ = $10.87
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Specialty Straps, 3-bar Slide Strap, Endless Loop, J Hook On The Strap
- Cam Buckle Belt Strap Configuration, Cam Buckle On One End, J Hook Sewn On After The Cam Buckle, Endless Loop
- Endless Loop Belt Configuration Functions By Bringing The Loose End Of The Strap Back To The Cam Buckle And Feeding Through The Teeth
- Cinch Cam Buckle Is Pulled Tight By Hand, No Built In Mechanical Tightening Mechanism
- Strap Is Fed Thru The Cinch Cam Buckle From Bottom Teeth Opening Thru To The Top Of The Buckle, Never Feed The Strap Top To Bottom
- Double J Hook Is Sewn After The Cam Buckle And Can Be Used As A Hook-on Point
- Double J Hook In This Configuration Is Commonly Used To Hang A Drum While Being Used My A Marching Band Drummer
- Commercial Duty Cinch Cam Buckle For Great Strength And Durability
- Cinch Cam Buckle Is Zinc-diecast, Made Of Zinc, And Has A Zinc-silver Finish. Zinc Diecast Material Is Rust Proof
- Commercial Duty Double J Hook For Great Strength And Durability
- Double J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Resistance
- Double J Hook Has A Wide Opening Hook That Can Fit Over A 1 Inch Diameter Bar
- Strap Is Made With 12000 Lb Polyester Tie-down Webbing
- Double Marker Lines Down Center Of The Webbing
- Webbing Has Black Edges
- Sewn With Silver Polyester Thread
- Strap Length Is Measured As Webbing Portion Only, The Cam Buckle Is Not Included In The Measurement
- Sewn In The Standard Method To Function As Intended
- No Strap Warning Tag Or Labeling On The Product
- Cinch Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Cam Teeth From Top To Bottom, It Will Not Hold To The Proper Strength
Variations of Product Type 1994
There are no variations of Product Type 1994 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
