Details:
- 2 Inch Strap
- CHJ2S-3M stainless steel double j wire hook on one end, 1 inch flat loop on opposite end
- Total Strap Length 1 Ft (12 Inches)
- CW2-BD6PE 2 Inch 6M Dark Blue Polyester Tie-Down Webbing
- 3600 lb Break Strength
- 1,200 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.48 lb
$11.59 Each
10+ = $10.49
50+ = $9.46
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
SPECIAL WARNINGS:
- Tie-downs, Strap Extender, J Hook On One End, Flat Sewn Loop On Opposite End
- Strap Extender Configuration, No Buckle Or Tightening Device, Only A Strap With A Double J Hook One End And 1 Inch Flat Sewn Loop On Opposite End
- Double J Hook Is Sewn On The Strap Orientated, Hook Facing Down, Relative To The Fold And Stitching
- Double J Hook Has Is Formed By Bending A Single Piece Of Wire In The Shape Of A J And Both Ends Of The Wire Are Brought Together To Form The Tip Of The Hook
- 1 Inch Flat Sewn Loop Is Formed By Folding Over The Webbing Flat Onto Itself, No Twisting, Narrowing Or Pinching Of The Strap
- 1 Inch Flat Sewn Loop Length Has A 2 Inch Circumference And Can Comfortably Fit Over A 1/2 (0.50) Inch Diameter Round Bar Or Bolt
- The Product Is Commonly Used A Replacement Fixed End Strap For A Ratchet Strap
- Commercial Grade Double J Hook For Great Strength And Durability
- J Hook Is Amde Of 304 Grade Stainless Steel
- Strap Is Made With 6000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured From The Inside Edge Of The J Hook To The Tip Of The Flat Sewn Loop
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CTD Strap Warning Label Sewn On The Hook End Of The Strap
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW2-BD6PE | 2 Inch 6M Dark Blue Polyester Tie-Down Webbing | 6,000 lb | 2,000 lb |
| CHJ2S-3M | 2 Inch Stainless Steel Double J Wire Hook | 3,600 lb | 1,200 lb |
- Product Is Not A Sling Nor Rated For Use As A Sling. Do Not Use For Lifting Or Personal Restraint.
Variations of Product Type 9106
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 4752 | End-fitting/hook Has A Zinc-Yellow Plated Finish |
PRODUCT MODELING
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 249 arrow_forward Config = 1054 arrow_forward Family = 1489 arrow_forward Type = 9106
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 249 arrow_forward Config = 1054 arrow_forward Family = 1489 arrow_forward Type = 9106
