Details:
- 1 Inch 4M Polyester Tie Down Webbing
- Cut to Length
- Total Strap Length 2 Ft (24 Inches)
- CW1-K4FPE 1 Inch 4M Black Flat Polyester Webbing
- 4500 lb Break Strength
- 1,500 lb Working Load Limit
- Made in the USA
Product Weight: 0.08 lb
$1.79 Per Strap
10+ = $1.55
100+ = $1.40
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Component Only, Replacement Strap, No Hooks Or End-fittings On Either End
- Webbing Cut To A Specific Length
- Cut Webbing Is Guaranteed To Be Continuous, No Splices Or Cuts In The Length
- Each Cut End Of The Webbing Is Seared With A Hot Knife To Prevent Fraying Or Unraveling
- The Maximum Length Available Is Based On The Roll Size The Webbing Is Stored In
- 4000+ Lb Heavy Duty Flat Polyester Webbing Is Commonly Used In Tie-downs Because Of Its Superior Strength, UV Resistance And Abrasion Resistance, Along With Limited Stretch
- There Are No Woven-in Marker Lines In This Webbing
- There Is No Added Edge Color On This Webbing, The Edges Are The Same Color As The Webbing
- Webbing Is Woven With The Flat Weave Pattern, The Yarn Is Noticable In The Weave, But The Surface Is Mostly Flat And Soft To The Touch
- Heavy Duty Webbing For The Highest Stength And Durability
- The Cut Strap Is Measured End To End
- Nominal Thickness Is .077 Inches
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 8041
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 9340 | Webbing Has A Single Marker Line Down The Middle |
