Details:
- 2 Inch Strap
- 1 Inch Flat sewn loop on one end, CHTH-7M Forged Snap Hook on opposite end
- Total Strap Length 16 Ft (192 Inches)
- CW2-K6SB 2 Inch 6M Black 5-Panel Polyester Seatbelt Style Webbing
- 4000 lb Break Strength
- 1,333 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.42 lb
$15.09 Each
10+ = $13.69
50+ = $12.35
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, Flat Sewn Loop On One End, Snap Hook On Opposite End
- Strap Extender Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
- 1 Inch Flat Sewn Loop On One End, Forged Eye Snap Hook On The Opposite End
- 1 Inch Flat Loop Can Be Attached To A Bolt Or To The Pin Inside A Boat Winch
- 1 Inch Flat Loops Have A Diameter Of 2 Inches And Can Fit Over A 1/2 Inch (0.50) Inch Diameter Bolt Or Pin
- Forged Eye Snap Hook Has A Retainer Clip That When Engaged Helps Prevent Unintentional Disconnects
- Commercial Duty Forged Snap Hook For High Strength And Durability
- Forged Snap Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
- Snap Hook Is Forged, Slightly Thicker Than The Flat Version, And Is Orientated Parallel With The Strap Once Sewn
- Strap Is Made With 6000 Lb Seatbelt Style Polyester Webbing. Webbing Nominal Thickness Is 0.049 Inch (1.2mm)
- Sewn With Silver Polyster Thread
- Strap Length Is Measured As The Webbing Portion Only Including The Flat Sewn Loop, The Hook Is Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Webbing Eye Of The Snap Hook Has Less Than A 1 Inch Opening, But The Webbing Is 2 Inches Wide. Webbing Is Necked Down To Fit Through The Eye And Sewn
- CTD Strap Warning Tag Sewn On The Hook End Of The Strap
- If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up
Variations of Product Type 7155
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 9247 | End-fitting/hook Is Made Of 316 Grade Stainless Steel |
