Details:
- 4 Inch Strap
- 1 Inch Flat sewn loop on one end, Combination of CHD2-10M D-ring, CFC2-11M Clevis Connector and CHTH-10M Forged Snap Hook on the opposite end
- Total Strap Length 16 Ft (192 Inches)
- CW4K-Y20PE 4 Inch 20M Yellow Polyester Tie-Down Webbing With Black Edges
- 10000 lb Break Strength
- 3,333 lb Working Load Limit
- Assembled in the USA
Product Weight: 3.3 lb
$32.09 Each
10+ = $29.18
50+ = $26.34
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, Flat Sewn Loop On One End, Combination Of D-ring, Connector Clevis And Snap Hook On Opposite End
- Strap Extender Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
- 1 Inch Flat Loop On The End Of The Strap Can Be Attached To A Bolt Or To The Pin Inside A Boat Winch. 1 Inch Flat Loop Can Fit Over A 1/2 Inch (0.50) Inch Diameter Bolt Or Pin
- Combination Of D-ring, Clevis Connector And Snap Hook On The Opposite End To Reduce Stress On The Webbing At The Hook End
- D-ring In The Combo Provides The Strap A Lesser Wear Point
- Clevis Connector Allows The Snap Hook To Be Connected To The D-ring
- Snap Hook On The End Has A Spring Loaded Keeper To Prevent Unintentional Disconnects After Attachment
- 2 Inch 10M Wire D-ring Is Made From 3/8 Inch Steel Wire. Combination Of 2 Inch D-ring Sewn To 4 Inch Webbing
- D-ring Is Made Of Steel And Has A Zinc-yellow Plated Finish
- 10M Forged Snap Hook Is Slightly Thicker Than The Corresponding Flat Snap Hook
- Clevis Connector Is Made Of Steel And Has A Zinc-yellow Plated Finish
- Forged Snap Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
- Strap Is Made With 20000 Lb Polyester Tie-down Webbing. Webbing Nominal Thickness Is 0.072 Inch (1.8mm)
- Sewn With White Polyster Thread
- Strap Length Is Measured As The Webbing Portion Only Including The Flat Sewn Loop, The D-ring, Clevis Connector And Hook Are Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Combination Of D-ring, Clevis Connector And Snap Hook Is About 6 Inches In Length
- CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Strap
- If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up
Variations of Product Type 6936
There are no variations of Product Type 6936 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
