Details:
- 1.5 Inch Strap
- 5 inch flat sewn loop on one end, CHTH-10M Forged Tow hook on opposite end
- Total Strap Length 2 Ft (24 Inches)
- CW15-Y4PE 1.5 Inch 4M Yellow Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.62 lb
$9.19 Each
10+ = $8.27
50+ = $7.47
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, Flat Sewn Loop On One End, Snap Hook On Opposite End
- Strap Extender Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
- 5 Inch Flat Sewn Loop On One End, Forged Eye Snap Hook On The Opposite End
- 5 Inch Flat Loop Can Be Attached To A Bolt Or To The Pin Inside A Boat Winch
- 5 Inch Flat Loops Have A Diameter Of 10 Inches And Can Fit Over A 3 Inch Diameter Bolt Or Rod
- Forged Eye Snap Hook Has A Retainer Clip That When Engaged Helps Prevent Unintentional Disconnects
- Heavy Duty Forged Eye Snap Hook For The Highest Strength And Durability
- Forged Snap Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
- Strap Is Made With 4500 Lb Polyester Tie-down Webbing. Webbing Nominal Thickness Is 0.065 Inch (1.6mm)
- Sewn With Silver Polyster Thread
- Strap Length Is Measured As The Webbing Portion Only Including The Flat Sewn Loop, The Hook Is Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Strap
- If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up
Variations of Product Type 6715
There are no variations of Product Type 6715 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
