Details:
- 1 Inch Stainless Steel Quick Release Tie Down
- CQR1S-6C 1 Inch Stainless Steel Quick Release Buckle
- CHS1S-1M Stainless Steel S Hook on fixed end, 5 inch flat sewn loop on end of adjustable strap
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW1-W4FPE 1 Inch 4M White Polyester Flat Webbing
- 600 lb Break Strength
- 200 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.64 lb
$14.09 Each
10+ = $12.78
50+ = $11.54
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Quick Release Tie-down, S Hook On One End, Flat Sewn Loop On The Opposite End
- Two Part Quick Release Configuration, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle And Is Fed Thru The Buckle To Be Tightened During Use
- Quick Release Buckle, Also Called A Flip Buckle, Provides A Small Amount Of Tension When It Is Flipped Closed, But Does Prevent The Strap From Slipping Or Removing After Closure
- Quick Release Buckles Are Quick And Easy To Use, But They Have A Specific Procedure For Feeding The Strap Through The Slots In The Frame, Follow The Instructions Closely
- S Hook Sewn On The End Of The Fixed End Strap
- 5 Inch Flat Sewn Loop On The End Of The Adjustable Strap Is Formed By Folding The Webbing Over On Top Of Itself, There Is No Narrowing, Twisting Or Pinching Of The Strap In The Loop
- 5 Inch Flat Sewn Loops Have A 10 Inch Circumference And Can Comfortably Fit Over A 3 Inch Diameter Bar
- Quick Release Buckle Has Two Webbing Slots. The Webbing Must Be Fed Properly Through The Buckle For Correct Operation. Make Sure To Read The Loading Instructions Or Watch The Instruction Video For Proper Use
- Quick Release Buckle Is Made Of Steel. The Frame Has A Black Resin Finish And The Wire Bale Has A Zinc-yellow Plated Finish
- S Hook Is A Commercial Grade Hook For Great Strength And Durability
- S Hook Is Made Of 304 Grade Stainless Steel
- S Hooks Are The Standard Configuration, One Closed End For The Webbing To Be Sewn And One Open Hook End. The Hook Opening Has A Diameter Larger Than 1 Inch So The Hook Can Fit Over A 1 Inch Round Bar Such As A Handlebar
- 4000+ Lb Heavy Duty Flat Polyester Webbing Is Commonly Used In Tie-downs Because Of Its Superior Strength, UV Resistance And Abrasion Resistance, Along With Limited Stretch
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As Only The Webbing Portion Including The Sewn Loop On The Adjustable Strap. The Buckle And S Hook Are Not Included In The Measurement
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn Next To The Loop On The End Of The Adjustable Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 49148
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 49093 | End-fitting/hook Has A Black Vinyl Coated Finish |
