Details:
- 1 Inch Strap Extender
- CHSRC1V-1M Vinyl Coated S Hook with Retainer Clip on both ends and hook openings face opposite direction
- Total Strap Length 2 Ft (24 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.57 lb
$7.29 Each
10+ = $6.55
50+ = $5.91
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, S Hook With Retainer Clip On Both Ends
- Strap Extender Configuration, No Buckle Or Tightening Device, Only A Strap With An S Hook With Retainer Clip On Each End Of The Strap
- The S Hooks Have A Built In Retainer Clip To Help Prevent The Hook From Unintentional Disconnecting From The Anchor Point
- The S Hooks Are Orientated So The Hook Openings Face The Opposite Direction
- The Retainer Clip On The S Hook Limits The Size Of The Anchor Point This Hook Can Be Attached To. When The Retainer Clip Is Pushed In To Its Lowest Point In The Hook Cavity, Clearance Is 0.35 Inch Between The Tip Of The Clip And The Curve Of The Hook
- S Hooks Are Made Of Steel And Have A Black Vinyl Coating To Help Prevent Them From Scratching Their Surroundings. The Retainer Clip Is Made Of Steel And Has A Zinc-silver Finish
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Measured Inside Hook Edge To Inside Hook Edge Of The Hooks
- Sewn In The Standard Method To Meet Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Strap Next To One S Hook
- Product Is Not A Sling Nor Rated For Use As A Sling. Do Not Use For Lifting Or Personal Restraint.
Variations of Product Type 6603
There are no variations of Product Type 6603 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
