Details:
- 2 Inch Strap With Built In Axle Strap
- CHTS2-10M twisted snap hook, hook facing down, on one end, CHTS2-10M twisted snap hook with adjustable d-ring and CPS2-K protective sleeve on axle strap end
- Total Strap Length 4 Ft (48 Inches)
- CW2-W12FPE 2 Inch 12M White Flat Polyester Webbing
- 6000 lb Break Strength
- 2,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 2.46 lb
$25.19 Each
10+ = $22.87
50+ = $20.64
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
SPECIAL WARNINGS:
- Tie-downs, Strap Extender, Twisted Snap Hook On One End, Combination Rectangle Loop With D-ring And Twisted Snap Hook On Opposite End
- Axle Strap, Twisted Snap Hooks On Both Ends, Hook Opening Facing The Same Direction, Adjustable D-ring On The Strap
- Product Is A Strap Only, No Buckle Or Tightening Device
- Combination Of D-ring And Twisted Snap Hook Can Be Hooked Together To Form An Axle Strap Used For Hauling Vehicles
- D-ring Has A Rectangular Ring Attached That Both Makes The D-ring Adjustable But Also Holds Under Tension
- Twisted Snap Hook Has A Built In Retainer Clip The Helps Prevent Unintentional Disconnects
- Axle Strap Area Between The D-ring And Twisted Snap Hook Has A Protective Sleeve To Help Prevent Premature Wear At The Axle Connection Point
- Twisted Snap Hook Is The Heavy Duty Version For The Highest Strength And Durability
- Twisted Snap Hooks And Flat Dee Ring Are Made Of Steel And Have A Zinc-yellow Plated Finish
- Heavy Duty Flat Stamped D-ring Provides The Highest Strength And Durability
- Flat Stamped D-ring Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- 12000 Lb Extra Heavy Duty Flat Polyester Webbing Is One Of The Common Webbing Styles Used In The Tie-down Industry. It Is Popular Due To Its Strength, Limited Stretch And UV Resistance
- Sewn With White Polyester Thread
- Strap Length Are Measured As Only The Webbing Portion When The Strap Is Fully Disconnected And At Its Maximum Length, The Hooks Are Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Protective Sleeve Is 12 Inches Long
- CustomTieDowns Strap Warning Tag Sewn On Next To Twisted Snap Hook On One End
- Black Protective Sleeve Is Made Of High Abrasion Resistant Nylon Webbing
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW2-W12FPE | 2 Inch 12M White Flat Polyester Webbing | 12,000 lb | 4,000 lb |
| CHDF2-10M | 2 Inch Flat Stamped Dee Ring, Zinc-yellow | 10,000 lb | 3,333 lb |
| CFSA2Z-6M | 2 Inch Forged Rectangular Ring, Zinc-silver | 6,000 lb | 2,000 lb |
| CHTS2-10M | 2 Inch 10M Twisted Snap Hook | 10,000 lb | 3,333 lb |
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Available Product Variations
Browse the default product for each available product type in this family. Color, length, and material can be adjusted on the product page.
PRODUCT MODELING
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 226 arrow_forward Config = 2923 arrow_forward Family = 2923 arrow_forward Type = 49857
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 226 arrow_forward Config = 2923 arrow_forward Family = 2923 arrow_forward Type = 49857
