Details:
- 1.5 Inch Cam Buckle Tie Down
- No Strap Tag
- CB15Z-1M 1.5 Inch Cam Buckle, Zinc-Silver
- Soft loop with CHS1V-1M Vinyl coated S Hook fixed end, Adjustable strap has a CHSRC1V-1M Vinyl Coated S hook with Retainer clip on end and a pull loop next to the buckle
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW15-Y4PEM 1.5 Inch 4M Yellow Polyester Tie-Down Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.18 lb
$17.09 Each
10+ = $15.49
50+ = $13.98
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, Combination Of S Hook And Soft Loop On One End, S Hook With Retainer Clip On The Opposite End
- One Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
- Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
- Product Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier
- There Is A Combination Flat Sewn Loop And S Hook On The Fixed End Strap
- The Flat Loop On The End Of Each Strap Is 5 Inch Long When Laid Flat. The Sewn Loop Can Be Used With The S Hook Or Without
- 5 Inch Flat Sewn Loops Have A 10 Inch Circumference And Can Comfortably Fit Over A 3 Inch Diameter Round Bar
- The S Hook Is Sewn 18 Inches From The Tip Of The Sewn Loop And Can Be Used Without Or Without The Sewn Loop
- Standard Operation Is To Wrap The Loop Around A Handle Bar Or Anchor Point, Then Connect The Loop Onto The S Hook
- There Is An S Hook With Retainer Clip Sewn On The End Of The Adjustable Strap
- S Hook With Retainer Clip Helps Prevent The Hook For Detaching Once Latched On To An Anchor Point
- Utility Style Cam Buckle, Adjustable Strap Slides Through The Middle Opening On The Bottom Of The Frame And Out The Teeth Of The Cam Buckle
- Cam Buckle Is Made Of Steel And Has A Zinc-silver Plated Finish
- Commercial Duty S Hook For Great Strength And Durabiltiy
- S Hook On The Fixed End Is Made Of Steel And Has A Black Vinyl Coating To Help Prevent Scratching The Surroundings
- Commercial Duty S Hook With Retainer Clip For Great Strength And Durabiltiy
- S Hook On The Adjustable Strap Is Made Of Steel And Has A Black Vinyl Coating To Help Prevent Scratching The Surroundings
- S Hook With Retainer Clip Is The Standard Configuration, It Has A 0.35 Inch Clearance When The Retainer Clip Is Pushed Into The Hook Cavity
- 4500 Lb Polyester Tie-down Webbing Is Commonly Used In Tie-downs Because Of Its Superior Strength, UV Resistance And Abrasion Resistance, Along With Limited Stretch
- Sewn With Silver Polyester Thread
- Fixed Strap Length Is Measured As The Distance Between The Back Of The Ratchet And The Beginning Of The S Hook. The Fixed Length Does Not Include The Cam Buckle, The S Hook Or The Soft Loop Portion. The Adjustable Strap Length Is Measured As The Webbing From The Front Of The Buckle To The Hook And Does Not Include The Buckle Or The Hook
- Sewn In The Standard Method To Meet Provided Strength Rating
- No Strap Tag Or Labeling On The Product
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 49771
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 49772 | Made With Commercial Duty Flat Polyester Webbing |
PRODUCT MODELING
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 444 arrow_forward Config = 4347 arrow_forward Family = 4619 arrow_forward Type = 49771
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 444 arrow_forward Config = 4347 arrow_forward Family = 4619 arrow_forward Type = 49771
