Details:
- 2 Inch Cam Buckle Tie Down
- CB2Z-3M Steel Cam Buckle With Zinc-Silver Plating
- CHE2-4M Spring E Fittings on fixed end, Adjustable strap has a sewn-in pull loop, CHD2-5M D ring on end of the strap and CHJ2-5M Double J wire hook, hook facing up, sewn 12 inches from d-ring
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW2-Y6PE 2 Inch 6M Yellow Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.86 lb
$14.79 Each
10+ = $13.36
50+ = $12.05
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, E-fitting On One End, J Hook With D-ring On Opposite End
- 1 Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
- Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
- Product Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier
- E-fitting On The Fixed End Has A Release Pin On One End That Allows Them To Disengage From The E-track
- The Adjustable Strap Has A Combination Of J Hook And D-ring
- The D-ring Is Sewn On The End Of The Adjustable Strap
- The J Hook Is Sewn Orientated Hook Facing Up And 12 Inches From The D-ring
- The Combination J Hook And D-ring Is Used By Wrapping The D-ring Around An Anchor Point And Then Connecting It To The J Hook
- CB2 Series Cam Buckle Is A Utility Style Cam Buckle With Push Down Relase Trigger. Utility Style Cam Buckles Must Have The Strap Loaded From The Middle Opening Underneath The Buckle, Then Fed Back Out The Teeth Of The Buckle
- Cam Buckle Is Made Of Steel And Has Zinc-silver Plated Finish
- Spring E-fittings Are Universal And Fit All E Series Logistic Track
- Spring E-fitting Is Made Of Steel And Has A Zinc-yellow Plated Finish
- Double J Wire Hook Has The Double Tip J Hook Configuration
- Double J Hook Is Made Of Steel And Has A Zinc-yellow Finish
- D-ring Is Formed Out Of Wire And The Seam Is Welded For Increased Strength
- D-ring Is Made Of Steel And Has A Zinc-yellow Finish
- Strap Is Made With 6000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Portion Only. The Adjustable Strap Is Measured From The Front Of The Buckle To The J Hook, The 12 Inch D-ring Extension Is Extra And Is Not Included In The Adjustable Strap Length Value
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Adjustable Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 5618
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 3969 | Buckle Has A Zinc-Yellow Plated Finish |
