Details:
- 1.5 Inch Strap
- 1 Inch Flat sewn loop on one end, CHTH-10M Forged Snap Hook on opposite end
- Total Strap Length 16 Ft (192 Inches)
- CW15-G4PE 1.5 Inch 4M Gray Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.16 lb
$13.99 Each
10+ = $12.70
50+ = $11.46
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, Flat Sewn Loop On One End, Snap Hook On Opposite End
- Strap Extender Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
- 1 Inch Flat Sewn Loop On One End, Forged Eye Snap Hook On The Opposite End
- 1 Inch Flat Loop Can Be Attached To A Bolt Or To The Pin Inside A Boat Winch
- 1 Inch Flat Loops Have A Diameter Of 2 Inches And Can Fit Over A 1/2 Inch (0.50) Inch Diameter Bolt Or Pin
- Forged Eye Snap Hook Has A Retainer Clip That When Engaged Helps Prevent Unintentional Disconnects
- Heavy Duty Forged Snap Hook For High Strength And Durability
- Forged Snap Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
- Snap Hook Is Forged, Slightly Thicker Than The Flat Version, And Is Orientated Parallel With The Strap Once Sewn
- Strap Is Made With 4500 Lb Polyester Tie-down Webbing. Webbing Nominal Thickness Is 0.065 Inch (1.6mm)
- Sewn With Silver Polyster Thread
- Strap Length Is Measured As The Webbing Portion Only Including The Flat Sewn Loop, The Hook Is Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- CTD Strap Warning Tag Sewn On The Hook End Of The Strap
- If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up
Variations of Product Type 5417
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 2018 | End-fitting/hook Is Made Of 316 Grade Stainless Steel |
