Details:
- 1 Inch Attachable Stainless Endless Loop Cam Buckle Tie Down
- No Strap Tag, Black Thread, CS1S-1S Stainless Cinch Cam Buckle
- CHF1S-1M Stainless Steel Flat Hook, hook facing down, on fixed end, Endless Loop (No Hook) with two 7/32 melted holes on adjustable end
- Total Strap Length 1.833 Ft (22 Inches)
- CW1-K3PE 1 Inch 3M Black Polyester Tie-Down Webbing
- 1000 lb Break Strength
- 333 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.28 lb
$21.89 Each
10+ = $19.79
50+ = $17.95
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, S Hook On One End, Endless Loop Configuration On The Opposite End
- Attachable Endless Loop Cam Buckle Tie-Down Configuration Has A Hook Sewn Behind The Buckle And An Adjustable Strap That Forms An Endless Loop With The Cam Buckle
- The Strap Is Sewn Between The Flat Hook And The Cam Buckle, Then Extends Back Beyond The Cam Buckle
- The Hook Is Used To Attach The Tie-down To An Anchor Point And The Extended Portion Of The Strap Is Then Used To Make A Large Endless Loop With The Cam Buckle
- Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
- Flat Hook Sewn On The Fixed End Is Orientated Hook Facing Down Relative To The Buckle Laying Flat
- Two Holes Melted Through The Loose End Of The Strap
- Commercial Duty Cinch Cam Buckle For Great Strength And Durability
- Cam Buckle Is Made Of 304 Grade Stainless Steel For Good Corrosion Resistance
- Commercial Duty Flat Hook For Great Strength And Durability
- Flat Hook Is Made Of 304 Grade Stainless Steel For Good Corrosion Resistance
- Flat Hook Is The Standard Configuration
- Melted Holes Have A 7/32 (0.22) Inch Diameter
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Black Polyester Thread
- Strap Length Is Measured As The Webbing Portion Only, The Hook Is Not Included In The Measurement
- Sewn With Two Stitches At All Lengths
- Sewn With The Smallest Tie-down Stitch
- Melted Hole 1.5 Inches From Tip Of Angle Cut And Second Hole 2.5 Inches From Tip
- No Strap Tag Or Labeling On The Product
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 49640
There are no variations of Product Type 49640 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
PRODUCT MODELING
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 326 arrow_forward Config = 5077 arrow_forward Family = 5709 arrow_forward Type = 49640
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 326 arrow_forward Config = 5077 arrow_forward Family = 5709 arrow_forward Type = 49640
