Details:
- 1 Inch Quick Release Tie-Down
- Protective Pad Sewn Under The Buckle
- CQR1S-6C 1 Inch Stainless Steel Quick Release Buckle
- CHS1V-1M Vinyl Coated S Hook on each end
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW1-G3PE 1 Inch 3M Gray Polyester Tie-Down Webbing
- 600 lb Break Strength
- 200 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.7 lb
$18.09 Each
10+ = $16.39
50+ = $14.79
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Quick Release Tie-down, S Hook On One End, S Hook On Opposite End
- Two Part Quick Release Configuration, Made Up Of A Fixed End And Adjustable Strap
- Adjustable Strap Is Separate From The Buckle And Is Fed Thru The Buckle To Be Tightened During Use
- Quick Release Buckle Has A Protective Pad Made Of Webbing Sewn Under The Buckle To Prevent Buckle From Scratching Its Surroundings
- S Hook Sewn On The End Of Both The Fixed End And Adjustable Straps
- The S Hook Openings Are Orientated So They Face The Same Direction
- Quick Release Buckle Has Two Webbing Slots And A Wire Bale On The Back. Check Operating Instructions To Properly Feed The Buckle
- Quick Release Buckle Is Made Of 304 Grade Stainless Steel
- S Hooks Are The Standard Configuration, One Closed End For The Webbing To Be Sewn And One Open Hook End. The Hook Opening Has A Diameter Larger Than 1 Inch So The Hook Can Fit Over A 1 Inch Round Bar Such As A Handlebar
- S Hooks Are Made Of Steel And Have A Black Vinyl Coating To Help Prevent The Hook From Scratching Its Surroundings
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Adjustable Strap
- Black Protective Pad Is Made Of Heavyweight Polypropylene Webbing
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 4242
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 3934 | Buckle Has A Combination Of Black Resin And Zinc-yellow Finish |
