Details:
- 1.5 Inch Cam Buckle Tie Down
- CB15Z-1M 1.5 Inch Cam Buckle, Zinc-Silver
- Combination CHS1V-1M vinyl coated s hook with 18 inch Soft Loop extension on Fixed End, CHCCG8-1M Pear Shaped Carabiner Sewn-on end of adjustable strap with sewn-in pull loop
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW15-Y4PE 1.5 Inch 4M Yellow Polyester Tie-Down Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.04 lb
$15.89 Each
10+ = $14.42
50+ = $13.02
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, Combination Of S Hook And Soft Loop On One End, Carabiner On The Opposite End
- One Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
- Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
- Product Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier
- There Is A Combination Flat Sewn Loop And S Hook On The Fixed End Strap
- The Sewn Loop On The End Of The Strap Is 5 Inch Long When Laid Flat. The Sewn Loop Can Be Used With The S Hook Or Without
- The S Hook Is Sewn 18 Inches From The Tip Of The Sewn Loop And Can Be Used Without Or Without The Sewn Loop
- Standard Operation Is To Wrap The Loop Around A Handle Bar Or Anchor Point, Then Connect The Loop Onto The S Hook
- There Is An Carabiner Clip Sewn On The End Of The Adjustable Strap
- Carabiner Clips Have A Built In Retainer Clip To Help Prevent Unintentional Disconnects
- Cam Buckle Is The Utility Style Cam Buckle. This Type Of Cam Buckle Is Intended To Have The Adjustable Strap Loaded During Assembly An Left Inside The Buckle. It Is Not To Be Fed And Removed Repeatedly. The Adjustable Strap Is Loaded Through The Middle Opening On The Bottom Side Of The Buckle And Fed Back Thru The Teeth Of The Cam Buckle
- Cam Buckle Is Made Of Steel And Has A Zinc-silver Plated Finish
- S Hook Is A Commercial Grade Hook For Great Strength And Durability
- S Hook Is Made Of Steel And Has A Black Vinyl Coating To Help Prevent Them From Scratching The Surroundings
- Carabiner Clip Is Pear Shaped With One Narrow End And A Wide Hook Opening End
- Carabiner Clip Is Made Of Steel And Has A Zinc-silver Plated Finish
- Carabiner Clip Has A Built In Eyelet That The Strap Is Fed Through, Once Sewn, The Carabiner Is Not Removable From The Strap
- Strap Is Made With 4500 Lb Polyster Tie-down Webbing
- Sewn With Silver Polyester Thread
- Fixed Strap Length Is Measured As The Distance Between The Back Of The Cam Buckle And The Beginning Of The S Hook. The Fixed Length Does Not Include The Cam Buckle, The S Hook Or The Soft Loop Portion. The Adjustable Strap Length Is Measured As The Webbing From The Front Of The Buckle To The Hook And Does Not Include The Buckle Or The Hook
- Sewn In The Standard Method To Meet Provided Strength Rating
- CTD Strap Warning Tag Sewn On The Carabiner End Of The Adjustable Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 4082
There are no variations of Product Type 4082 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
