Details:
- 1 Inch Cinch Strap Endless Loop Tie Down
- Sewn Hem Under, Protective Pad Under Buckle
- CS1-1M 1 Inch Zinc Diecast Cam Buckle
- Endless (No Hooks) with Hook and Loop storage strap, end of strap angle cut
- Total Strap Length 2 Ft (24 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 1050 lb Break Strength
- 350 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.26 lb
$10.29 Each
10+ = $9.26
50+ = $8.35
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
- Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle
- Endless Loop Tie-downs Are Used By Wrapping The Strap Around The Cargo And The Loose End Is Fed Back Thru The Buckle, There Are No Hooks, The Strap Just Makes A Loop When Tightened
- Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
- Protective Pad Made Of Webbing Sewn Under The Buckle To Help Prevent The Buckle From Scratching Its Surroundings
- Hook And Loop Strap Sewn Onto Primary Strap To Hold Any Excess Strap During Use Or For Storage
- Commercial Duty Cinch Cam Buckle For Great Strength And Durability
- Cinch Cam Buckle Is Made From Zinc-Diecast Metal And Has A Zinc-silver Finish. Zinc-Diecast Buckles Are Rust Proof
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Measured As The Webbing Portion Only, The Buckle Is Not Included In The Measurement
- Strap End Is Folded Under The Primary Strap, Rather Than Over Next To The Buckle, To Tuck The Cut End Between The Strap And Protective Pad
- Sewn With The Smallest Tie-down Stitch
- Hook And Loop Storage Strap Is Positioned 3 Inches From The Back Of The Buckle
- CTD Strap Warning Tag Sewn Next To The Buckle On The Underside Of The Primary Strap
- Black Protective Pad Is Made From Heavyweight Polypropylene Webbing
- Cinch Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Cam Teeth From Top To Bottom, It Will Not Hold To The Proper Strength
Variations of Product Type 2370
There are no variations of Product Type 2370 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
