Complete your order
Pricing & ordering
Choose your quantity and add this customized configuration to your cart.
$9.49 Each
10+ = $8.52
50+ = $7.69
Product at a glance
Details & specifications
Break strength
1050 lb
Working load limit
350 lb
1 Inch Cinch Strap Endless Loop Tie Down
Components & materials
- CS1-1M 1 Inch Zinc Diecast Cam Buckle
- Endless (No Hooks) with Hook and Loop storage strap, end of strap angle cut
- CW1-W4FPE 1 Inch 4M White Polyester Flat Webbing
Dimensions
- Product weight: 0.26 lb
- Total Strap Length 2 Ft (24 Inches)
Product notes
- Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
- Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
- Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
- End Of The Strap Is Angle Cut To Make Feeding The Strap Thru The Buckle Easier
- Protective Pad Made Of Webbing Sewn Under The Buckle To Help Prevent The Buckle From Scratching Its Surroundings
- Hook And Loop Strap Sewn Across Strap 3 Inches Back From Buckle. Hook And Loop Strap Is Used To Wrap Up Any Unused Strap During Use Or For Storage
- Cinch Style Buckle Has The Cinch Cambuckle Configuration Where The Strap Is Fed Bottom Of Buckle Thru Top Of Buckle And Pulled Tight
- Cinch Cam Buckle Is Made From Zinc-Diecast Metal And Has A Zinc-silver Finish. Zinc-Diecast Buckles Are Rust Proof
- Strap Is Made With 4500 Lb Flat Polyester Webbing
- Sewn With Black Polyester Thread
- Strap Length Measured As The Webbing Portion Only, The Buckle Is Not Included In The Measurement
- Strap End Is Folded Under The Primary Strap, Rather Than Over Next To The Buckle, To Tuck The Cut End Between The Strap And Protective Pad
- No Strap Tag Or Labeling Sewn On The Product
- Black Protective Pad Is Made From Heavyweight Polyrpropylene Webbing
Component specifications
Component strengths
Safety information
Special warnings
- Cinch Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Cam Teeth From Top To Bottom, It Will Not Hold To The Proper Strength
Additional views
Product images
Compare your options
Available Product Variations
Browse the default product for each available product type in this family. Color, length, and material can be adjusted on the product page.
