Details:
- 2 Pack, Rack-Strap RS7, 1-1/4 Inch O.D. Round Mounting Bracket, Zinc-Yellow Plated Frame, Bolt Mounting Hardware Included, Zinc-yellow Hardware, Double J Wire Hook On End Of Strap
- RS7 Zinc-Yellow Plated RS7 Frame
- Total Strap Length 8 Ft (96 Inches)
- CWS15-K4PE 1.5 Inch 4M Black Polyester Tie-Down Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Manufactured in the USA
Product Weight: 6.49 lb
$98.00 Per 2-pack
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Rack-strap, Rack-strap Tie-downs, J Hook On One End
- Rack-Strap Tie-Down, Mountable Ratchet Strap For Truck And Van Ladder Racks
- Mounting Bracket Can Be Bolted Or Welded Directly To The Ladder Rack So The Tie-down Permanently Mounted And Always Ready For Use
- For Proper Use, The Strap Is Pulled Out From The Spool, Fed Under The Ladder Or Cargo, Brought Back Over The Cargo Untill The Hook Reaches Back To The Rack-Strap Frame. The Hook Is Then Connected To The Frame On The Front Pin And Ratcheted Tight
- Rack-Strap Offers Two Tightening Options, The Provided Tightening Rod Or 1/2 Inch Nut On The End Of The Drive Axle
- The Black Knob Is Provided As A Method Of Winding Up The Loose Strap Or Removing Any Slack, But Never Use The Knob To Tighten The Tie-down
- Rack-strap 1-1/4 Inch Round Mounting Bracket Is Designed To Mount To Ladder Racks Made Of 1-1/4 Inch Round Pipe. To Be Sure On The Correct Bracket, Measure The Outside Diameter Of The Mounting Location On The Ladder Rack To Determine Which Size Round Bracket Will Fit
- Rack-strap Frame Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- J Hook On The End Of The Strap Is The Double J Configuration And Has A Special Back Bend To Fit The Rack-Strap Frame
- Double J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- All Attached Rack-Strap Hardware Has A Zinc-yellow Plated Finish
- Strap Is Made With 4500 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured As The Total Maximum Length When The Strap Is Fully Extended From The Frame
- Sewn In The Standard Method To Meet The Provided Strength Rating
- Rack-Strap Brand Strap Warning Label Sewn On The Hook End Of The Strap
- Includes The Bolt Mounting Kit For Installation
- 2 Pack Display Packaging
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
