Complete your order
Pricing & ordering
Choose your quantity and add this customized configuration to your cart.
$6.89 Each
10+ = $6.22
50+ = $5.62
Product at a glance
Details & specifications
Break strength
1500 lb
Working load limit
500 lb
1 Inch Cam Buckle Endless Loop Tie Down
Components & materials
- CB1-1M 1 Inch Cam Buckle, Zinc-Yellow
- Endless Loop (No Hooks), end of strap is angle cut
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
Dimensions
- Product weight: 0.51 lb
- Total Strap Length 6 Ft (72 Inches)
Product notes
- Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
- Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
- Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
- This Product Is Built Using A Utility Style Cam Buckle, Which Is The Stronger Cam Buckle Style, But Means The Loose End Of The Strap Must Be Fed Through The Teeth From Back To Front For Proper Operation
- End Of The Strap Is Angle Cut To Make Feeding The Strap Thru The Buckle Easier
- Strap Is Stitched 7 Inches From The Back Of The Buckle To Create A Loop Immediately Behind The Buckle
- Cam Buckle Is The Utility Style Cam Buckle, Strap Must Be Fed Thru Middle Opening In Bottom Of Frame And Back Thru Teeth In Front Of Buckle
- Buckle Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Only, The Buckle Is Not Included In The Length
- Strap Is Stitched 7 Inches From The Back Of The Buckle To Create A Loop Immediately Behind The Buckle
- CustomTieDowns Strap Warning Tag Sewn On Strap Next To The Buckle
Component specifications
Component strengths
Safety information
Special warnings
- Utility Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Back Through The Front In Order To Properly Hold The Strap After Tightening. The Strap Can Be Loaded From The Middle Opening On The Bottom Of The Buckle And Fed Through The Teeth Back To Front Also. NEVER Load The Strap Through The Cam Teeth From Front To Back, It Will Not Hold To The Proper Strength
Additional views
Product images
Compare your options
Available Product Variations
There are no additional product variations currently available.
For help finding another option, contact customer service at sales@customtiedowns.com or 1-877-360-5528.
