$5.49 Each
10+ = $4.91
50+ = $4.43
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Anchoring Tie-down, Bolt Plate On One End Of The Strap, Two D-ring Combination After Bolt Plate
- Anchoring Strap Configuration, Bolt Plate On The End Of The Strap, Combo Double D-rings Sewn-in Looped 5 Inches From Bolt Plate
- Bolt Plate On One End Of The Strap Has A Slight Bend. The Bend Is Orientated, Bend Angle Up, Relative To The Topside Of The Strap And The D-rings
- The Bolt Plate Has A Mounting Hole To Anchor The Strap Using A Bolt Or Screw
- The Strap Is Tightened By Weaving The Loose End Of Strap Thru The Middle Of Both D-rings, Fed Back Between D-rings And Pulled Tight
- The CFBP1 Angled Bolt Plate Is Designed To Be Mounted With A 0.50 Inch Bolt
- Bolt Plate Is Made Of Steel And Is Zinc-yellow Plated For Superior Weather Protection
- D-rings Are Made From Metal Wire And Formed In The Shape Of The Letter D
- D-rings Are Made Of Steel And Have A Bright Nickel Plationg
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Product Is Not D.O.T. Rated, Not Intended For Highway Or Transportation Use
- Strap Lengths Are Measured As The Primary Webbing Length Only, Bolt Plate And D-ring Loop Are Not Included In The Length Measurement
- Product Is Sewn The Standard Method To Meet The Provided Strength Rating
- No Strap Warning Tag Or Labeling On The Product
- Product Has No Applicable Strength Rating And Is Not Intended For D.O.T. Or Highway Cargo Transport





Variations of Product Type 2074
There are no variations of Product Type 2074 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.