Details:
- 1 Inch Spring Buckle Tie-Down
- No Strap Tag
- CSB1N-2C 1 Inch Nickel Plated Spring Buckle
- CG0B Size #0 1/4 Inch ID Brass Grommet on both ends
- Fixed End 1 Ft (12 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 6 Ft (72 Inches)
- CW1-R8PP 1 Inch Heavyweight Red Polypropylene Webbing
- 200 lb Break Strength
- 67 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.22 lb
$8.99 Each
10+ = $8.11
50+ = $7.32
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Spring Buckle Tie-down, Grommet On Both Ends
- Spring Buckle Tie-Down Configuration, Made Up Of A Fixed End And Adjustable Strap With A Grommet Installed At Each End
- Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Spring Buckle And Tightened
- Spring Buckles Are Operated By Inserting The Adjustable Strap Through The Teeth From Underneath, Up Through The Teeth And Out The Top Of The Buckle
- Spring Buckles Do Not Have A Mechanical Tightening System, They Must Be Pulled Tight By Hand
- A Grommet Is Installed On The End Of Both The Fixed End Strap And Adjustable Strap
- Each Grommet Is Positioned So The Center Of The Grommet Is 3/4 (0.75) Inch From The End Of The Strap End Of The Strap
- Spring Buckles Are Intended For General And Light Commercial Applications
- Spring Buckle Is Made Of Steel And Has A Nickel Plated Finish That Has A Silver Color Appearance
- Size #0 Grommet Installed On Both The Fixed And Adjustable Straps. Size #0 Grommets Have An Inside Diameter Of 1/4 (0.25) Inch
- The Grommets Are Made Of Brass And Have The Brass/bronze Color Finish
- Strap Is Made With Heavyweight Polypropylene Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured Tip To Tip Of The Webbing, The Buckle Is Not Included In The Measurement
- Sewn In The Standard Method To Meet The Provided Strength Rating
- No Strap Tag Or Label On The Product. Not Labeled For D.O.T. Applications
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 1964
There are no variations of Product Type 1964 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
