Complete your order
Pricing & ordering
Choose your quantity and add this customized configuration to your cart.
$17.89 Each
10+ = $16.23
50+ = $14.64
Product at a glance
Details & specifications
Break strength
300 lb
Working load limit
100 lb
1 Inch Stainless Cinch-Strap Endless Loop Cam Buckle Tie Down
Components & materials
- CS1S-3C-316 1 Inch Stainless Steel Cam Buckle, 316 Stainless
- Endless Loop (No Hooks), Strap End angle cut
- CW1-W1SPE 1 Inch White Smooth Polyester Webbing
Dimensions
- Product weight: 0.22 lb
- Total Strap Length 2 Ft (24 Inches)
Product notes
- Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
- Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
- Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
- This Tie-down Is Made With A Cinch Style Cam Buckle, Which Means The Loose End Of The Strap Must Be Fed Through The Teeth From Bottom To Top For Proper Operation
- End Of The Strap Is Angle Cut To Make Feeding The Strap Thru The Buckle Easier
- Standard Duty Cam Buckle For Light Commercial Or General Applications
- Cinch Cam Buckle Is Made From 316 Grade Stainless Steel
- Strap Made With 1800 Lb Smooth Polyester Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Only, The Buckle Is Not Included In The Length
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Strap Next To The Buckle
Component specifications
Component strengths
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW1-W1SPE | 1 Inch White Smooth Polyester Webbing | 1,800 lb | 600 lb |
| CS1S-3C-316 | 1 Inch Stainless Steel Cam Buckle, 316 Stainless | 300 lb | 100 lb |
Safety information
Special warnings
- Cinch Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Cam Teeth From Top To Bottom, It Will Not Hold To The Proper Strength
Additional views
Product images
Compare your options
Available Product Variations
Browse the default product for each available product type in this family. Color, length, and material can be adjusted on the product page.
PRODUCT MODELING
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 1 arrow_forward Config = 1832 arrow_forward Family = 1191 arrow_forward Type = 14487
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 1 arrow_forward Config = 1832 arrow_forward Family = 1191 arrow_forward Type = 14487
