Details:
- 2 Inch Stainless Overcenter Buckle Tie Down
- Black Protective Pad Sewn Under The Buckle
- COB2S-3M 2 Inch Stainless Steel Overcenter Buckle
- CFBP175S-5M Stainless Bolt Plate, Angle Up, on fixed end, CHTS2S-5M Twisted Snap hook, hook down, on end of adjustable strap
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW2-W6FPE 2 Inch 6M White Polyester Flat Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 2.22 lb
$57.79 Each
10+ = $52.55
50+ = $47.43
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Overcenter Tie-down, Bolt Plate On One End, Twisted Snap Hook On Opposite End
- 2 Part Overcenter Buckle Tie-down Has A Fixed End And A Separate Adjustable Strap
- Fixed End Strap Is Sewn At A Specific Length And Is Not Adjustable
- Loose End Of The Adjustable Strap Is Fed Through The Slots In The Overcenter Buckle And The Length Can Be Adjusted As Needed Until Tightened
- Overcenter Buckles Provide A Small Amount Of Tension When The Buckle Lever Arm Is Closed, But Will Only Be Tight If All The Slack Is Removed Before The Lever Arm Is Closed Shut
- Protective Pad Under The Buckle To Help Prevent Scratching The Surroundings
- The Bolt Plate Sewn On The Fixed End Has A Slight Angle Bend In The Frame
- The Bolt Plate Is Orientated, Bend Angle Up, Relative To The Buckle Laying Flat
- Twisted Snap Hook Sewn On The End Of The Adjustable Strap Has A Retainer Clip To Help Prevent Disconnections
- Twisted Snap Hook Is Orientated, Hook Facing Down, Relative To The Buckle Laying Flat
- Commercial Duty Overcenter Buckle For Great Strength And Durability
- Overcenter Buckle Is Made Of 304 Grade Stainless Steel For Good Corrosion Resistance
- Overcenter Buckle Is Secured With A Spring Loaded Latch, Latch Must Be Pressed In To Release The Lever Arm
- Commercial Duty Angled Bolt Plate For Great Strength And Durability
- Bolt Plate Is Made Of 304 Grade Stainless Steel For Good Corrosion Resistance
- Angled Bolt Plate Is Designed To Be Mounted With A 1/2 (0.50) Inch Bolt
- Twisted Snap Hook Is Made Of 304 Grade Stainless Steel For Good Corrosion Resistance
- Commercial Duty Twisted Snap Hook For Great Strength And Durability
- 6000 Lb Flat Polyester Webbing Is One Of The Common Webbing Styles Used In The Tie-down Industry. It Is Popular Due To Its Strength, Limited Stretch And UV Resistance
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Length Only, And Includes The Loop On The Fixed End, Buckle And Hook Are Not Included In The Strap Length Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- CTD Strap Warning Tag On Fixed End Only
- Black Protective Pad Is Made Of Heavyweight Polypropylene Webbing
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 49518
There are no variations of Product Type 49518 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
