Details:
- 4 Inch Strap Extender
- Black 12 Inch Protective Sleeve On The Strap
- CHFA4K-16M Black Flat hook, facing down, on one end, 5 Inch Pieced Sewn Loop with protective sleeve on the opposite end
- Total Strap Length 6 Ft (72 Inches)
- CW4K-Y20PE 4 Inch 20M Yellow Polyester Tie-Down Webbing With Black Edges
- 14000 lb Break Strength
- 4,667 lb Working Load Limit
- Assembled in the USA
Product Weight: 2.36 lb
$29.29 Each
10+ = $26.64
50+ = $24.04
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Loop Strap, Flat Hook On One End, Pieced Sewn Loop On The Opposite Ends
- Strap Extender Configuration, Flat Hook On One End, Pieced Sewn Loop On The Opposite End
- Strap Extenders Have No Tightening Mechanism, They Are Sewn To A Specific Length
- Flat Hook Sewn On One End Is A Common Flat Bed Hook That Fits Flat Bed Trailer Rails
- 5 Inch Pieced Sewn Loop On The Other End Is Formed By Using Webbing Half The Width Of The Primary Strap, Forming A Loop Out Of It And Sewing The Narrower Webbing Onto The Primary Strap
- The 5 Inch Loop Length Has A Circumference Of 10 Inches And Will Fit Over A 3 Inch Diameter Round Bar
- The Tip Of The Pieced Sewn Loop Is Folded In Half And Sewn So That The Tip Width Of The Loop Is 1/4 The Width Of The Primary Strap
- The Narrowing Of The Pieced Sewn Loop Making The Tip Smaller Allows The Loop To Fit Around Other Hooks Or Anchor Points Easier
- Protective Sleeve Is Placed Around The Tip Of The Pieced Sewn Loop To Help Prevent Premature Wear
- Adjustable Protective Sleeve Is Installed On The Middle Of The Strap To Help Prevent Premature Wear In The Common Rub Areas
- Heavy Duty Flat Hook For The Highest Strength And Durability
- Flat Hook Is Made Of Steel And Has A Black Resin Finish
- Primary Strap Is Made With Heavy Duty 20000 Lb Polyester Tie-down Webbing. Pieced Loop Is Made With 12000 Lb Polyester Tie-down Webbing
- Sewn With White Polyester Thread
- Strap Length Is Measured From Inside Edge Of The Flat Hook To The Tip Of The Sewn Loop
- Sewn In The Standard Method To Meet The Provided Strength Rating
- Protective Sleeve Is 12 Inches In Length
- CTD Strap Warning Tag Sewn On The Flat Hook End Of The Strap
- Pieced Sewn Loop Has A Protective Sleeve Around The Tip Made Of Highly Abrasion Resistant Polyester And A Sliding Black Nylon Protective Sleeve Along The Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 14156
There are no variations of Product Type 14156 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
