Details:
- 1.5 Inch Endless Loop Spring Buckle Tie Down
- #2 Brass Grommet Installed After Stitch, No Strap Tag
- CSB15S-3C 1.5 Inch Stainless Steel Spring Buckle
- Endless Loop (No Hooks), strap end Angle Cut
- Total Strap Length 2.33 Ft (28 Inches)
- CW15-K12PP 1.5 Inch Heavyweight Black Polypropylene Webbing
- 240 lb Break Strength
- 80 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.21 lb
$9.89 Each
10+ = $8.93
50+ = $8.06
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT ASSEMBLY:
PRODUCT NOTES:
SPECIAL WARNINGS:
- Tie-downs, Spring Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
- Endless Loop Spring Buckle Tie-Down Configu Ration, Strap Sewn To The Back Of The Buckle, It Has No Hooks
- To Use The Endless Loop Tie-down, Wrap The Strap Around The Cargo, Feed The Strap From Bottom To Top Through The Buckle And Pull Tight By Hand
- The Loose End Of Strap Is Angle Cut For Easier Feeding Of Strap Thru Buckle
- A Grommet Is Installed Behind The Stitch And Is Used To Mount The Strap
- Standard Duty Spring Buckle For Light Commercial And General Applications
- Spring Buckle Is Made Of 304 Grade Stainless Steel
- Size #2 Grommet Has An Inside Diameter Of 3/8 Inch
- Grommet Is Made Of Brass And Has The Standard Gold Brass Color
- Strap Is Made With Heavyweight Polypropylene Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured As Only The Webbing Portion From The Back Of The Buckle To The Tip Of The Loose End Of The Webbing
- Sewn In The Standard Method To Meet The Provided Strength Rating
- Sewn With The Standard Tie-down Stitch
- No Strap Tag Or Labeling On The Product
- No Instruction Sheet
- Banded Together In Packs Of 10
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW15-K12PP | 1.5 Inch Heavyweight Black Polypropylene Webbing | 1,200 lb | 400 lb |
| CSB15S-3C | 1.5 Inch Stainless Steel Spring Buckle | 300 lb | 100 lb |
- Spring Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Teeth From Top To Bottom, It Will Not Hold To The Proper Strength
Available Product Variations
Browse the default product for each available product type in this family. Color, length, and material can be adjusted on the product page.
PRODUCT MODELING
Top = 1 arrow_forward Group = 38 arrow_forward Layout = 1 arrow_forward Config = 4812 arrow_forward Family = 5300 arrow_forward Type = 13367
Top = 1 arrow_forward Group = 38 arrow_forward Layout = 1 arrow_forward Config = 4812 arrow_forward Family = 5300 arrow_forward Type = 13367
