Details:
- 1 Inch Retractable Ratchet Strap
- Black Thread
- Soft loop configuration on Fixed end with 3 inch flat loop and Vinyl coated S Hook with retainer clip, Vinyl coated S hook with retainer clip on end of Adjustable Strap
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 6 Ft
- Total Strap Length 6.5 Ft (78 Inches)
- CW1-K1SB 1 Inch 1M Black 5-Panel Polyester Seatbelt Style Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Assembled in the USA
Product Weight: 2.28 lb
$27.19 Each
10+ = $24.67
50+ = $22.27
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Retractable Ratchet Strap, Combination Of S Hook With Retainer Clip And Soft Loop On One End, S Hook With Retainer Clip On The Opposite End
- Retractable Ratchet Strap Configuration With A Fixed End Strap Connected To The Back Of The Buckle And An Adjustable Strap Wound Up And Contained In The Ratchet Buckle
- The Adjustable Strap Is Contained In The Retractable Mechanism Until It Is Pulled Out To The Desired Length
- Combination Flat Sewn Loop With Sewn-on Clippable S-hook On The Fixed End, Clippable S Hook On The End Of The Adjustable Strap
- Flat Sewn Loop With Clippable S Hook Is Called A Soft Loop
- Clippable S Hooks Have A Retainer Clip To Help Prevent The Hook From Disconnecting
- The Clippable S Hook On The Fixed End Is Positioned 18 Inches From The Tip Of The Flat Loop
- Flat Sewn Loop Is 3 Inches Long, Has A Circuference Of 6 Inches And Can Comfortably Fit Over A 1.75 Inch Diameter Round Bar
- Most Commonly, The Soft Loop Configuration Is Used By Wrapping The Loop End Around An Anchor Point, Then Clipping The S-hook On The Sewn Loop
- Commercial Duty Retractable Ratchet For Great Strength And Durability
- Ratchet Is Made Of Steel And Has A Zinc-yellow Plated Finish. The Ratchet Has A Red Plastic Base And A Black Plastic Cover Over The Retractable Mechanism
- Ratchet Has A Standard Retractable Locking Mechanism
- Ratchet Has A Thumb Style Handle With Black/red Comfort Grip
- Commercial Duty S Hook With Retainer Clip For Great Strength And Durability
- S Hook Is Made Of Steel And Has A Black Vinyl Coating To Help Prevent Scratching The Surroundings. Retainer Clip Is Made Of Steel And Has A Zinc-silver Plated Finish
- Made With 1800 Lb Polyester Seatblet Style Webbing
- Sewn With Black Polyester Thread
- The Fixed End Length Is Measured From The S Hook To The Pin Of The Ratchet. The 18 Inch Soft Loop Extension Is Not Included In The Measurement. The Adjustable Strap Length Is Measured From The Pin Of The Ratchet Buckle To The Tip Of The S Hook When The Strap Is Fully Extended From The Buckle
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CTD Warning Tag Sewn Next To The Hook On The Fixed End
- On Hooks With Retainer Clips, Such As Snap Hooks, Carabiner Clips And Clippable S Hooks, The Retainer Clip May Push Into The Hook Cavity And Reduce The Connection Area Of The Hook. Always Check The Hook Clearance Spacing Will Work With Your Application
Variations of Product Type 13425
There are no variations of Product Type 13425 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
